Code Control Module (function 07): Procedure

WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2005 Audi allroad, 2004 Audi allroad, 2004 Audi A6, 2003 Audi allroad, and 2003 Audi S6. However, it is still accessible from the selected car via links, so may be relevant.

Initiate output Diagnostic Test Mode of instrument cluster. See INSTRUMENT CLUSTER ON BOARD DIAGNOSTIC (OBD), INITIATING .

Display on VAS 5051:

Fig 1: VAS 5051 Tester Display - Code Control Module (Instrument Cluster) (1 Of 4)

Courtesy of AUDI OF AMERICA, INC.

Select diagnostic function "07 - Code Control Module" in selection -1-.

Display on VAS 5051:

Fig 2: VAS 5051 Tester Display - Code Control Module (Instrument Cluster) (2 Of 4)

Courtesy of AUDI OF AMERICA, INC.

Enter code word Max. input value = 32767

Enter 5-digit coding in button field -2- according to coding table. See CODING VERSION FOR ADDITIONAL EQUIPMENT . If necessary, insert zeros in front.

Example:

Desired input value: 2266

Keypad input: 02266

Press -Q- button to confirm input.

Display on VAS 5051:

Fig 3: VAS 5051 Tester Display - Code Control Module (Instrument Cluster) (3 Of 4)

Courtesy of AUDI OF AMERICA, INC.

Coding will be performed

Wait until the next indication appears on display.

Display on VAS 5051:

Fig 4: VAS 5051 Tester Display - Code Control Module (Instrument Cluster) (4 Of 4)

Courtesy of AUDI OF AMERICA, INC.

Coding in vehicle system performed
Control module identification with new coding
(previous coding in parentheses)

End function "07 - Erase DTC Memory" by pressing <-- button.