Display group overview

WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2005 Audi allroad, 2004 Audi allroad, 2004 Audi A6, 2003 Audi allroad, and 2003 Audi S6. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Rear Measuring Value Display Group Overview - Instrument Cluster (001 To 011)

Courtesy of AUDI OF AMERICA, INC.

Fig 2: Rear Measuring Value Display Group Overview - Instrument Cluster (012 To 015)

Courtesy of AUDI OF AMERICA, INC.

Fig 3: Rear Measuring Value Display Group Overview - Instrument Cluster (050 To 140)

Courtesy of AUDI OF AMERICA, INC.

NOTE:

If the instrument cluster is replaced, the data from display groups 010 to 015 must be printed out.
Measuring value blocks 125 and 126 indicate the components that are part of the powertrain CAN-bus.
Measuring value block 130 indicates the participants in the comfort system CAN-bus.
Measuring value block 140 indicates the participants in the information CAN-bus.
Display will always indicate the actual values obtained from senders and sensors. The values which appear on the instrument cluster are filtered and may be different.
If the actual coolant temperature is between 80 °C and 100 °C, the instrument cluster always displays 90 °C.