LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 1999 >> A6 Quattro >> Repair and Diagnosis >> External Pages >> Different car >> Section 32 (On Board Diagnostic (OBD) - 2001 And Up) >> Instrument cluster, On Board Diagnostic (OBD) >> Output Diagnostic Test Mode (DTM) (function 03) >> Notes

Output Diagnostic Test Mode (DTM) (function 03): Notes

WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2005 Audi allroad, 2004 Audi allroad, 2004 Audi A6, 2003 Audi allroad, and 2003 Audi S6. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
  • Output Diagnostic Test Mode (DTM) is only possible with engine idle and ignition switched on.
  • If malfunctions are detected during Output Diagnostic Test Mode (DTM), determine cause of malfunction and repair.
scientia non olet · About LEMON Manuals