LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 1999 >> A6 Quattro >> Repair and Diagnosis >> External Pages >> Different car >> Section 32 (On Board Diagnostic (OBD) - 2001 And Up) >> Instrument cluster, On Board Diagnostic (OBD) >> Data exchange between control modules, checking >> Notes

Data exchange between control modules, checking: Notes

WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2005 Audi allroad, 2004 Audi allroad, 2004 Audi A6, 2003 Audi allroad, and 2003 Audi S6. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
  • Data exchange between individual control modules occurs via a bus system.
  • The term "CAN-bus" refers to a system that transports and distributes data.
  • The wire connections between the control modules, via which data is transferred, are referred to as data wires.
  • Data is transferred to the connected control modules serially (one after the other) via these data wires.
scientia non olet · About LEMON Manuals