Section 120 (28 - Ignition System -- CARRERA (997))
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
- WM 2800TW Technical Data, Ignition System (Turbo Coupe, Turbo CABRIO, Gt2, Gt3 & Gt3 RS)
- WM 280419 Removing And Installing Ignition Switch (All Models)
- WM 282019 Removing And Installing Ignition Rod Module (Except Turbo Coupe, Turbo S Coupe, Turbo CABRIO & Turbo S CABRIO)
- WM 282019 Removing And Installing Bar Ignition Module (Turbo Coupe, Turbo S Coupe, Turbo CABRIO & Turbo S CABRIO)
- WM 282019 Removing And Installing Ignition Coil (Gt3 & Gt3 RS)
- WM 283919 Removing And Installing Hall Sender (Turbo Coupe, Turbo S Coupe, Turbo CABRIO & Turbo S CABRIO)
- WM 283919 Removing And Installing Hall Sender (Turbo Coupe, Turbo CABRIO & Gt2)
- WM 283919 Removing And Installing Hall Sender (Gt2 RS)
- WM 287219 Removing And Installing Knock Sensor (All Models)
- WM 287219 Removing And Installing Knock Sensor (Turbo Coupe, Turbo S Coupe, Turbo CABRIO & Turbo S CABRIO)
- WM 287020 Removing And Installing Spark Plugs (Turbo Coupe, Turbo CABRIO & Gt2)
- WM 287020 Removing And Installing Spark Plugs (Turbo Coupe, Turbo S Coupe, Turbo CABRIO & Turbo S CABRIO)
- 28 70 20 REMOVING AND INSTALLING SPARK PLUGS - as of MY 2005 (CARRERA 2, CARRERA 2S, CABRIO 2, CABRIO 2S, CARRERA 4, CABRIO 4)
- WM 287020 Removing And Installing Spark Plugs (Gt2 RS)
- WM 287219 Removing And Installing Knock Sensor (Gt2 RS)
- WM 287219 Removing And Installing Knock Sensor (Turbo Coupe, Turbo CABRIO & Gt2)
- WM 287319 Removing And Installing Pulse Sender (Speed Sender) (All Models)
- WM 287319 Removing And Installing Pulse Sender (Speed Sender) (Turbo Coupe, Turbo S Coupe, Turbo CABRIO & Turbo S CABRIO)