LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 120 (28 - Ignition System -- CARRERA (997)) >> WM 287020 Removing And Installing Spark Plugs (Turbo Coupe, Turbo CABRIO & Gt2) >> Technical Values

Technical Values

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
Location Description Type Basic value Tolerance 1 Tolerance 2
Spark plug New spark plug Tightening torque 30 Nm (22 ft. lb.)    
Spark plug Refitted Tightening torque 25 Nm (19 ft. lb.)    
Inner Torx screw securing ignition coil to cylinder head cover M6 Tightening torque 10 Nm (7.5 ft. lb.)    
Torx screw securing heat shield to cylinder head cover M6 Tightening torque 10 Nm (7.5 ft. lb.)    
Hexagon socket head bolt securing electronic adjuster to turbocharger M6 Tightening torque 10 Nm (7.5 ft. lb.)    
Hexagon socket head bolt securing electronic adjuster to turbocharger M6 Tightening torque 10 Nm (7.5 ft. lb.)    
Speed nut securing heat shield to body   Tightening torque 3.5 Nm    
Nut securing engine carrier to engine mounting M12 Tightening torque 85 Nm (63 ft. lb.)    
Nut securing retaining bracket to turbocharger M6 Tightening torque 10 Nm (7.5 ft. lb.)    
Torx screw securing intake air line to turbocharger M6 Tightening torque 10 Nm (7.5 ft. lb.)    
Wheel to wheel carrier M14 Tightening torque 130 Nm (96 ft. lb.)    


Location Description Type Basic value Tolerance 1 Tolerance 2
Spark plug New spark plug Tightening torque 30 Nm (22 ft. lb.)    
Spark plug Refitted Tightening torque 25 Nm (19 ft. lb.)    
Inner Torx screw securing ignition coil to cylinder head cover M6 Tightening torque 10 Nm (7.5 ft. lb.)    
Torx screw securing heat shield to cylinder head cover M6 Tightening torque 10 Nm (7.5 ft. lb.)    
Hexagon socket head bolt securing electronic adjuster to turbocharger M6 Tightening torque 10 Nm (7.5 ft. lb.)    
Hexagon socket head bolt securing electronic adjuster to turbocharger M6 Tightening torque 10 Nm (7.5 ft. lb.)    
Speed nut securing heat shield to body   Tightening torque 3.5 Nm    
Nut securing engine carrier to engine mounting M12 Tightening torque 85 Nm (63 ft. lb.)    
Nut securing retaining bracket to turbocharger M6 Tightening torque 10 Nm (7.5 ft. lb.)    
Torx screw securing intake air line to turbocharger M6 Tightening torque 10 Nm (7.5 ft. lb.)    
Wheel to wheel carrier M14 Tightening torque 130 Nm (96 ft. lb.)    
scientia non olet · About LEMON Manuals