LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 120 (28 - Ignition System -- CARRERA (997)) >> WM 283919 Removing And Installing Hall Sender (Gt2 RS) >> Preliminary Work

Preliminary Work

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove air cleaner housing.

    → 242519 REMOVING AND INSTALLING AIR CLEANER HOUSING - GT2 RS

  2. Remove rear wheel.

    → 440519 REMOVING AND INSTALLING WHEEL WITH CENTRAL BOLT .

  3. Remove rear apron.

    → 635519 REMOVING AND INSTALLING REAR APRON .

  4. Remove bumper.

    → 635019 REMOVING AND INSTALLING REAR BUMPER .

  5. Remove charge-air cooler.

    → 214319 REMOVING AND INSTALLING CHARGE-AIR COOLER - GT2 RS

  6. Remove heat shield.

    → 261219 REMOVING AND INSTALLING HEAT SHIELD - GT2 RS .

scientia non olet · About LEMON Manuals