Subsequent Work

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.

Install heat shield.
→ 261219 REMOVING AND INSTALLING HEAT SHIELD - TURBO
After removing the bar ignition module for cylinder 5: Install electronic adjuster.
→ WM 216619 REMOVING AND INSTALLING ELECTRONIC ADJUSTER FOR TURBOCHARGER (TURBO COUPE, TURBO S COUPE, TURBO CABRIO & TURBO S CABRIO) .
Install heat shield on catalytic converter.
→ 635019 REMOVING AND INSTALLING REAR BUMPER .
Install charge air cooler.
→ 214319 REMOVING AND INSTALLING CHARGE AIR COOLER .
Install the rear apron.
→ 635519 REMOVING AND INSTALLING REAR APRON .