Preliminary Work

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.

CAUTION: Hot components

Risk of burns

→ Let hot components cool down.

→ Wear personal protective gear.

Remove rear apron.
→ 635519 REMOVING AND INSTALLING REAR APRON .
Remove charge air cooler.
→ 214319 REMOVING AND INSTALLING CHARGE AIR COOLER .
Remove heat shield on catalytic converter.
→ 635019 REMOVING AND INSTALLING REAR BUMPER .
The electronic adjuster must be removed for the bar ignition module for cylinder 5.
→ WM 216619 REMOVING AND INSTALLING ELECTRONIC ADJUSTER FOR TURBOCHARGER (TURBO COUPE, TURBO S COUPE, TURBO CABRIO & TURBO S CABRIO) .
Remove heat shield.
→ 261219 REMOVING AND INSTALLING HEAT SHIELD - TURBO .