LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 120 (28 - Ignition System -- CARRERA (997)) >> WM 283919 Removing And Installing Hall Sender (Turbo Coupe, Turbo CABRIO & Gt2) >> Preliminary Work

Preliminary Work

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove air cleaner housing → 242519 REMOVING AND INSTALLING AIR CLEANER HOUSING - section on "Removing".
  2. Remove rear wheels using special tool socket-wrench insert P300. → 44051900 REMOVING AND INSTALLING WHEEL - section on "Removing".
  3. Remove rear apron → 635519 REMOVING AND INSTALLING REAR APRON - section on "Removing".
  4. Remove bumper → 635019 REMOVING AND INSTALLING REAR BUMPER - section on "Removing".
  5. Remove the two charge air coolers → 214319 REMOVING AND INSTALLING CHARGE AIR COOLER - section on "Removing".
  6. Remove cover plate → 261219 REMOVING AND INSTALLING COVER PLATE - section on "Removing".
scientia non olet · About LEMON Manuals