13 - Engine - CRANKGEAR, Pistons -- CARRERA (997)

WM 131001 Checking Piston Wear (CARR. Coupe, CARR. S Coupe, CARR. CABRIO, CARR. S CABRIO, CARR. 4 Coupe, Turbo Coupe, CARR. 4S Coupe, TARGA 4, TARGA 4S, CARR. 4 CABRIO, CARR. 4S CABRIO, Turbo CABRIO, Gt2)
- Checking Piston Wear
WM 131020 Removing And Installing Pistons And Handling Tools (Except Turbo Coupe, Turbo S Coupe, Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3, Gt2, Gt3 RS, Gt2 RS, Gt3 RS 4.0)
- Tools
- Technical Values
- Removal
  - Removing Pistons - Cylinder Bank 1-3
  - Removing Pistons - Cylinder Bank 4-6
- Assembly
  - Pre-Fitting Pistons And Connecting Rods
- Installation
  - Installing Pistons - Cylinder Bank 4-6
  - Installing Pistons - Cylinder Bank 1-3
WM 131020 Removing And Installing Pistons - Turbo (Turbo Coupe, Turbo S Coupe, Turbo S Coupe "Ed. 918 SPYDER", Turbo CABRIO, Turbo S CABRIO, Turbo S CABRIO "Ed. 918 SPYDER")
- Tools
- Technical Values
- Removal
  - Removing Pistons - Cylinder Bank 1-3
  - Removing Pistons - Cylinder Bank 4-6
- Assembly
  - Pre-Fitting Pistons And Connecting Rods
- Installation
  - Installing Pistons - Cylinder Bank 4-6
  - Installing Pistons - Cylinder Bank 1-3
WM 131020 Removing And Installing Pistons (With Cylinder Sleeve) - Gt3 (Gt3, Gt3 RS)
- Tools
- Preliminary Work
- Removing Pistons - GT3
  - Notes
  - Removal For Cylinder Bank 1-3
- Installing Pistons - GT3
  - Installing Pistons
- Subsequent Work
WM 131020 Removing And Installing Pistons (With Cylinder Sleeve) (Turbo Coupe, Turbo S Coupe, Turbo CABRIO, Turbo S CABRIO, Gt2)
- Tools
- Preliminary Work
- Removing Pistons
- Installing Pistons
- Subsequent Work
WM 1310IN Piston Wear, Weight Groups And Identification Markings (Except Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3, Gt2, Gt3 RS, Gt2 RS, Gt3 RS 4.0)
- Information
  - Weight Groups And Identification Markings
- Checking
  - Checking For Wear
WM 1344IN Mounting Specification For Connecting Rod Bolts - Gt3/Gt3 RS (Gt3, Gt3 RS, Gt3 RS 4.0)
- Technical Values
  - Tightening Torques For New Connecting Rod Bolts
- Information
WM 137319 Removing And Installing Belt TENSIONER (All Models)
- Technical Values
- Preliminary Work
- Removing Belt Tensioner
- Installing Belt Tensioner
  - Replacing Tensioner/Damper Element
  - Installing Belt Tensioner
- Subsequent Work
WM 134819 Removing And Installing Crankshaft (Gt3, Gt3 RS)
- Tools
- Technical Values
- Preliminary Work
- Component Overview For Crankcase
  - Overview Of Crankcase 1-3 (Symbolic Representation)
- Removing Crankshaft
- Installing Crankshaft
- Subsequent Work
WM 134819 Removing And Installing Crankshaft (Turbo Coupe, Turbo CABRIO, Gt3, Gt2, Gt3 RS)
- Tools
- Technical Values
- Preliminary Work
- Removing Crankshaft
  - Component Overview For Crankcase
  - Removing Crankshaft
- Installing Crankshaft
- Subsequent Work
WM 134837 Disassembling And Assembling Crankshaft (Turbo Coupe, Turbo CABRIO, Gt2)
- Tools
- Technical Values
- Preliminary Work
- Disassembling Crankshaft
- Replacing Connecting Rod Bolts
- Assembling Crankshaft
- Subsequent Work
WM 134837 Disassembling And Assembling Crankshaft - Gt3 (Gt3, Gt3 RS)
- Tools
- Technical Values
- Preliminary Work
- Disassembling Crankshaft
- Assembling Crankshaft
- Subsequent Work
WM 1348TW Tightening Torques For Engine - Crank Drive, Pistons (Turbo Coupe, Turbo CABRIO, Gt3, Gt2, Gt3 RS)
- Information
WM 135919 Removing And Installing Crankshaft Sealing Ring - Flywheel Side (Turbo Coupe, Turbo CABRIO, Gt2)
- Tools
- Technical Values
- Preliminary Work
- Removing Sealing Ring
- Installing Sealing Ring
- Subsequent Work
WM 135919 Removing And Installing Crankshaft Sealing Ring - Flywheel Side - Turbo (Turbo Coupe, Turbo S Coupe, Turbo S Coupe "Ed. 918 SPYDER", Turbo CABRIO, Turbo S CABRIO, Turbo S CABRIO "Ed. 918 SPYDER")
- Tools
- Technical Values
- Preliminary Work
- Removing Crankshaft Sealing Ring - Flywheel Side
- Installing Crankshaft Sealing Ring - Flywheel Side
- Subsequent Work
WM 135919 Removing And Installing Crankshaft Sealing Ring - Gt3 (Flywheel Side) (Gt3, Gt3 RS)
- Tools
- Technical Values
- Preliminary Work
- Removing Sealing Ring
  - Removing Crankshaft Sealing Ring
- Installing Sealing Ring
  - Installing Crankshaft Sealing Ring
- Subsequent Work
WM 136019 Removing And Installing Single-Mass Flywheel (Gt3, Gt3 RS)
- Tools
- Technical Values
- Preliminary Work
- Removing Flywheel
- Installing Flywheel
- Subsequent Work
WM 136019 Removing And Installing Dual-Mass Flywheel (Except Turbo Coupe, Turbo S Coupe, Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3, Gt2, Gt3 RS, Gt2 RS, Gt3 RS 4.0)
- Tools
- Technical Values
- Preliminary Work
- Removal
  - Removing Flywheel
- Installation
  - Installing Flywheel
- Subsequent Work
WM 136019 Removing And Installing Dual-Mass Flywheel - Turbo (Turbo Coupe, Turbo S Coupe, Turbo S Coupe "Ed. 918 SPYDER", Turbo CABRIO, Turbo S CABRIO, Turbo S CABRIO "Ed. 918 SPYDER")
- Tools
- Technical Values
- Preliminary Work
- Removing Dual-Mass Flywheel
- Installing Dual-Mass Flywheel
- Subsequent Work
WM 136019 Removing And Installing Flywheel - PDK Transmission (Except Turbo Coupe, Turbo S Coupe, Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3, Gt2, Gt3 RS, Gt2 RS, Gt3 RS 4.0)
- Tools
- Technical Values
- Preliminary Work
- Removal
  - Removing Flywheel - PDK Transmission
- Installation
  - Installing Flywheel - PDK Transmission
- Subsequent Work
WM 136019 Removing And Installing Flywheel (Turbo Coupe, Turbo CABRIO, Gt3, Gt2)
- Tools
- Technical Values
- Preliminary Work
- Removal
- Installation
  - Installing Flywheel
- Subsequent Work
WM 136019 Removing And Installing Flywheel - PDK Transmission - Turbo (Turbo Coupe, Turbo S Coupe, Turbo S Coupe "Ed. 918 SPYDER", Turbo CABRIO, Turbo S CABRIO, Turbo S CABRIO "Ed. 918 SPYDER")
- Tools
- Technical Values
- Preliminary Work
- Removing Flywheel
  - Removing Flywheel - Porsche Doppelkupplung (PDK)
- Installing Flywheel
  - Installing Flywheel - Porsche Doppelkupplung (PDK)
- Subsequent Work
WM 136319 Removing And Installing Drive Plate For Converter (CARR. Coupe, CARR. S Coupe, CARR. CABRIO, CARR. S CABRIO, CARR. 4 Coupe, CARR. 4S Coupe, TARGA 4, TARGA 4S, CARR. 4 CABRIO, CARR. 4S CABRIO)
- Tools
- Technical Values
- Preliminary Work For Drive Plate For Converter
- Removing Drive Plate For Converter
- Installing Drive Plate For Converter
- Subsequent Work For Drive Plate For Converter
WM 137319 Removing And Installing Belt TENSIONER (Turbo Coupe, Turbo CABRIO, Gt2)
- Technical Values
- Information
- Preliminary Work
- Removing Belt Tensioner
- Installing Belt Tensioner
- Subsequent Work
WM 137419 Removing And Installing Crankshaft Sealing Ring - Belt Side (Except CARRERA 4 GTS, CARRERA 4 GTS CABRIO, Gt3, Gt2, Gt3 RS, Gt2 RS, Gt3 RS 4.0)
- Tools
- Technical Values
- Preliminary Work
- Removal
  - Removing Sealing Ring
- Installation
  - Installing Sealing Ring
- Subsequent Work
WM 137419 Removing And Installing Crankshaft Sealing Ring - Pulley Side (Turbo Coupe, Turbo CABRIO, Gt3, Gt2, Gt3 RS)
- Tools
- Technical Values
- Preliminary Work
  - Preliminary Work For 997 Turbo/GT2
- Removal
  - Removing Sealing Ring
- Installation
  - Installing Crankshaft Sealing Ring - Turbo/GT2
- Subsequent Work
  - Subsequent Work For 997 Turbo/GT2
WM 137519 Removing And Installing Vibration Damper - Turbo (Turbo Coupe, Turbo S Coupe, Turbo S Coupe "Ed. 918 SPYDER", Turbo CABRIO, Turbo S CABRIO, Turbo S CABRIO "Ed. 918 SPYDER")
- Tools
- Technical Values
- Preliminary Work
- Removing Vibration Damper
- Installing Vibration Damper
- Subsequent Work
WM 137519 Removing And Installing Vibration Damper (Except Turbo Coupe, Turbo S Coupe, Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo CABRIO, Turbo S CABRIO, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3, Gt2, Gt3 RS, Gt2 RS, Gt3 RS 4.0)
- Tools
- Technical Values
- Preliminary Work
- Removal
  - Removing Vibration Damper
- Installation
  - Installing Vibration Damper
- Subsequent Work
WM 137619 Removing And Installing Aluminium Pulley - Gt3 (Gt3, Gt3 RS)
- Tools
- Technical Values
- Preliminary Work
- Removing Aluminum Pulley
- Installing Aluminum Pulley
- Subsequent Work
WM 137619 Removing And Installing Pulley (Turbo Coupe, Turbo CABRIO, Gt3, Gt2, Gt3 RS)
- Tools
- Technical Value
- Preliminary Work
  - Preliminary Work For 997 Turbo/GT2
- Removing Pulley
  - Removing Steel Pulley
- Installing Pulley
  - Installing Steel Pulley
- Subsequent Work
  - Subsequent Work For 997 Turbo/GT2
WM 137801 Checking Drive Belt (Except Turbo Coupe, Turbo S Coupe, Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo CABRIO, Turbo S CABRIO, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3, Gt2, Gt3 RS, Gt2 RS, Gt3 RS 4.0)
- Preliminary Work
- Checking Drive Belt
- Subsequent Work
WM 137801 Checking Drive Belt - Turbo (Turbo Coupe, Turbo S Coupe, Turbo S Coupe "Ed. 918 SPYDER", Turbo CABRIO, Turbo S CABRIO, Turbo S CABRIO "Ed. 918 SPYDER")
- Preliminary Work
- Checking Drive Belt
- Subsequent Work
WM 137801 Checking Drive Belt - Gt2 RS
- Preliminary Work
- Checking Drive Belt
- Subsequent Work
WM 137819 Removing And Installing Drive Belt (Except Turbo Coupe, Turbo S Coupe, Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo CABRIO, Turbo S CABRIO, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3, Gt2, Gt3 RS, Gt2 RS, Gt3 RS 4.0)
- Preliminary Work
- Removal
  - Removing Drive Belt
- Installation
  - Installing Drive Belt
- Subsequent Work
WM 137819 Removing And Installing Drive Belt - Turbo (Turbo Coupe, Turbo S Coupe, Turbo S Coupe "Ed. 918 SPYDER", Turbo CABRIO, Turbo S CABRIO, Turbo S CABRIO "Ed. 918 SPYDER")
- Technical Values
- Preliminary Work
- Removing Drive Belt
- Installing Drive Belt
- Subsequent Work
WM 137819 Removing And Installing Drive Belt - Gt2 RS
- Technical Values
- Preliminary Work
- Removing Drive Belt
- Installing Drive Belt
- Subsequent Work