LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2011 >> 911 Speedster >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 13 - Engine - CRANKGEAR, Pistons -- CARRERA (997) >> WM 135919 Removing And Installing Crankshaft Sealing Ring - Flywheel Side (Turbo Coupe, Turbo CABRIO, Gt2) >> Subsequent Work

Subsequent Work

NOTE: Removing and installing flywheel
  • Leaks
  • Risk of damage to the flywheel and adjacent components

→ Be very careful during removal and installation.

→ Get another person to help because of the weight.

  1. Install flywheel.

    → Tightening torque: 85 Nm (63 ftlb.) 

    Turbo only (not GT2):  → Tightening torque: 90 Nm (67 ftlb.) 

    Information 

    Loosen and tighten screws on the component according to specifications.

    Information 

    Loosen and tighten screws on the component according to specifications.

  2. Manual transmission:  Install clutch.

    → 305019 REMOVING AND INSTALLING CLUTCH .

    → Tightening torque: 23 Nm (17 ftlb.) 

  3. Mount transmission.

    Manual transmission:  → 343527 REMOVING AND MOUNTING TRANSMISSION .

    Automatic transmission (997 Turbo only):  → 373527 REMOVING AND MOUNTING AUTOMATIC TRANSMISSION .

  4. Install engine-transmission unit.

    → 100119 REMOVING AND INSTALLING ENGINE .

scientia non olet · About LEMON Manuals