Subsequent Work

WARNING: Danger of objects or loads falling down

→ Secure components to prevent them from falling down.

Raise the engine into installation position.
1. 1.1. Tighten M12 collar nuts.
  → Tightening torque: 85 Nm (63 ftlb.)
2. 1.2. Engine retainer plate 9111/3 and accessories must be removed.
Install rear silencer.
→ Installing Rear Silencer .
Install the drive belt.
→ 137819 REMOVING AND INSTALLING DRIVE BELT .
Install air cleaner housing.
→ 242519 REMOVING AND INSTALLING AIR CLEANER HOUSING .