Removing Belt Tensioner

→ Avoid contact with caustic fluid.

→ Wear personal protective gear.

→ Ensure that there is good ventilation.

→ If you do come into contact, wash off immediately with plenty of warm water and contact a doctor if necessary.

1. Remove unit carrier.
   1. 1.1. Remove coolant flange -5-  .

      Unscrew M6 screw -4-  on cable rail.

      Unscrew M6 x 20 screws -3-  and take off coolant flange.

      Fig 1: Identifying Unit Carrier

      Courtesy of PORSCHE CARS NORTH AMERICA, INC.
   2. 1.2. Unscrew four M10 x 60 screws -1-  and remove unit carrier -2-  .
2. Remove belt tensioner.

   Unscrew M6 x 16 screw -3-  and two M8 x 16 screws -2-  and pull belt tensioner -1-  off the tensioning lever.

   Fig 2: Identifying Belt Tensioner

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.