Subsequent Work
NOTE:
Removing and installing flywheel
- Leaks
- Risk of damage to the flywheel and adjacent components
→ Be very careful during removal and installation.
→ Get another person to help because of the weight.
- Fit flywheel.
→ 136019 REMOVING AND INSTALLING FLYWHEEL .
→ 136019 REMOVING AND INSTALLING SINGLE-MASS FLYWHEEL .
→ Tightening torque: 85 Nm (63 ftlb.)
→ Tightening torque: 90 Nm (67 ftlb.)
Information
Loosen and tighten screws on the component according to specifications.
- Centre the clutch plate on the flywheel with the centering mandrel 9102
and install the pressure plate.
→ 305019 REMOVING AND INSTALLING CLUTCH .
→ Tightening torque: 23 Nm (17 ftlb.)
→ Tightening torque: 23 Nm (17 ftlb.)
- Install transmission.