Technical Values
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Dual-mass flywheel to crankshaft | M10 - 12.9 | Tightening torque | 85 Nm (63 ftlb.) | ||
| Single-mass flywheel to crankshaft | M10 - 12.9 | Tightening torque | 90 Nm (67 ftlb.) | ||
| Clutch pressure plate to dual-mass flywheel | M8 x 40, tighten crosswise and in several stages | Tightening torque | 23 Nm (17 ftlb.) | ||
| Clutch pressure plate to single-mass flywheel (GT3 RS) | M8 x 45, tighten crosswise and in several stages | Tightening torque | 23 Nm (17 ftlb.) |