Section 8 (Radio, Navigation & Pcm Diagnosis - 911 CARRERA (996))
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2005 Porsche 911, 2004 Porsche 911, 2003 Porsche 911, 2002 Porsche 911, and 2001 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
- System N 01
- General information
- Component arrangement
- Function of individual components
- System description
- Tools
- Connector pin assignment, display and operator control unit
- Connector pin assignment, navigation unit
- Identification
- Fault memory
- Fault overview
- Erasing fault memory
- Actual values
- Input signals
- Interface status
- Drive links
- Position
- Modify coding
- System P 01
- System description
- Tools
- Component arrangement
- Function of individual components
- Connector assignment
- Fault overview
- Identification
- Fault memory
- Clear the fault memory
- Actual values
- Drive links
- Modifying the coding
- PCM2 gateway - Introduction
- Notes
- General instructions/safety instructions
- General information on the fault memory
- Display * in the menu Control modules and menu PCM2/ CDR23 MOST component check.
- Units
- Vehicle type vehicle coding
- Vehicle version vehicle coding
- Right/left-hand drive vehicle coding
- Vehicle hand-over
- Air conditioning
- Coding country-specific tuner settings
- Country-specific tuner settings
- MOST switch
- Coding PCM2
- Production mode
- Control module replacement - PCM2
- PCM2 gateway tools
- PCM2 gateway component arrangement
- PCM2 gateway connector assignment
- PCM2 gateway control module function
- Terminating resistors on the CAN
- Audio tests
- CAN comfort
- CD changer (CDC)
- Coding table
- Coding
- Data transfer fault
- Function of the components
- Gateway
- Identification
- Actual values
- Man Machine Interface (MMI)
- MOST actual and required installed components lists
- MOST component check
- MOST lock/MOST unlock
- MOST - optical/electrical
- MOST switch
- MOST unlock counter
- Navigation
- Ring break diagnosis line
- Input signals
- Single CD
- Special function
- Voice control system (VOCS) (optional)
- Drive links
- PCM2 control module (head unit)
- Telephone/telematics (optional)
- Tuner
- External amplifier
- Internal amplifier
- Wake-up function
- PCM2 gateway fault overview
- 8001 PCM2 - gateway
- 8002 PCM2 - gateway
- 8004 PCM2 - gateway
- 8005 PCM2 - gateway
- 800A PCM2 - gateway
- 800B PCM2 - gateway
- PCM2 MMI - Introduction
- PCM2 MMI tools
- PCM2 MMI component arrangement
- PCM2 MMI connector assignment
- PCM2 MMI control module function
- Terminating resistors in the CAN
- CAN comfort
- CD changer (CDC)
- Coding table
- Coding
- Data transfer fault
- Extended identification
- Function of the components
- Gateway
- Identification
- Actual values
- Man Machine Interface (MMI)
- MOST component check
- MOST actual and required installed components lists
- MOST lock/MOST unlock
- MOST - optical/electrical
- MOST switch
- MOST unlock counter
- Navigation
- Ring break diagnosis line
- Input signals
- Single CD
- Special function
- Voice control system (VOCS) (optional)
- Drive links
- PCM2 control module (head unit)
- Telephone/telematics (optional)
- Tuner
- External amplifier
- Internal amplifier
- Wake-up function
- PCM2 MMI fault overview
- 8002 Pcm2 MMI
- 8003 Pcm2 MMI
- 8004 Pcm2 MMI
- 8005 Pcm2 MMI
- 8006 Pcm2 MMI
- 8007 Pcm2 MMI
- 8009 Pcm2 MMI
- 800C Pcm2 MMI
- Introduction - external Harman amplifier
- External Harman amplifier tools
- Component arrangement - external Harman amplifier
- External Harman amplifier connector assignment
- Control module function - external Harman amplifier
- Terminating resistors on the CAN
- CAN comfort
- CD changer (CDC)
- Coding table
- Coding
- Data transfer fault
- Function of the components
- Gateway
- Identification
- Actual values
- Man Machine Interface (MMI)
- MOST actual and required installed components lists
- MOST lock/MOST unlock
- MOST - optical/electrical
- MOST switch
- MOST unlock counter
- Navigation
- Ring break diagnosis line
- Input signals
- Single CD
- Special function
- Voice control system (VOCS (optional))
- Drive links
- PCM2 control module (head unit)
- Telephone/telematics
- Tuner
- External amplifier
- Internal amplifier
- Wake-up function
- External Harman amplifier fault overview
- 8001 External Harman amplifier
- 8002 External Harman amplifier
- 8003 External Harman amplifier
- 8004 External Harman amplifier
- 8005 External Harman amplifier
- 8006 External Harman amplifier
- 8007 External Harman amplifier
- 8008 External Harman amplifier
- 8009 External Harman amplifier
- Introduction - external BOSE amplifier
- Tools - external BOSE amplifier
- Component arrangement - external BOSE amplifier
- External BOSE amplifier connector assignment
- Control module function - external BOSE amplifier
- Terminating resistors on the CAN
- CAN comfort
- CD changer (CDC)
- Coding table
- Coding
- Data transfer fault
- Function of the components
- Gateway
- Identification
- Actual values
- Man Machine Interface (MMI)
- MOST actual and required installed components lists
- MOST component check
- MOST lock/MOST unlock
- MOST - optical/electrical
- MOST switch
- MOST unlock counter
- Navigation
- Ring break diagnosis line
- Single CD
- Voice control system (VOCS (optional))
- PCM2 control module (head unit)
- Input signals
- Telephone/telematics (optional)
- Tuner
- External amplifier
- Internal amplifier
- Wake-up function
- External BOSE amplifier fault overview
- 8001 External BOSE amplifier
- 8002 External BOSE amplifier
- 8003 External BOSE amplifier
- 8004 External BOSE amplifier
- 8005 External BOSE amplifier
- 8009 External BOSE amplifier
- 800A External BOSE amplifier
- 800B External BOSE amplifier
- 8011 External BOSE amplifier
- 8012 External BOSE amplifier
- 8013 External BOSE amplifier
- 8014 External BOSE amplifier
- 8015 External BOSE amplifier
- 8016 External BOSE amplifier
- 8017 External BOSE amplifier
- 8018 External BOSE amplifier
- Telephone/telematics - Introduction
- Telephone/telematics tools
- Telephone/telematics component arrangement
- Telephone/telematics connector assignment
- Telephone/telematics control module function
- Terminating resistors in the CAN
- CAN comfort
- CD changer (CDC)
- Coding table
- Coding
- Data transfer fault
- Installation position of the control module
- Function of the components
- Gateway
- Identification
- Actual values
- Lock/MOST unlock
- Man Machine Interface (MMI)
- MOST actual and required installed components lists
- MOST component check
- MOST switch
- Navigation
- Ring break diagnosis line
- Input signals
- Voice control system (VOCS)
- Drive links
- PCM2 control module (head unit)
- Telephone/telematics
- MOST unlock counter
- External amplifier
- Internal amplifier
- Wake-up function
- Telephone/telematics fault overview
- 9603 Telephone/telematics
- 9604 Telephone/telematics
- 9605 Telephone/telematics
- 9606 Telephone/telematics
- Navigation - introduction
- Radio, Navigation & Pcm Diagnosis - 911 CARRERA (996)
- Navigation tools
- Navigation component arrangement
- Navigation connector assignment
- Navigation control module function
- Terminating resistors in the CAN
- CAN comfort
- CD changer (CDC)
- Coding table
- Coding
- Data transfer fault
- Function of the components
- Gateway
- Identification
- Man Machine Interface (MMI)
- MOST actual and required installed components lists
- MOST component check
- MOST lock/MOST unlock
- MOST - optical/electrical
- MOST switch
- MOST unlock counter
- Navigation
- Ring break diagnosis line
- Input signals
- Single CD
- Voice control system (VOCS (optional))
- Drive links
- PCM2 control module (head unit).
- Telephone/telematics (optional)
- Tuner
- External amplifier
- Internal amplifier
- Wake-up function
- Navigation fault overview
- 8002 Navigation
- 8020 Navigation
- 8021 Navigation
- 8025 Navigation
- CDR23 - Introduction
- CDR23 tools
- CDR23 component arrangement
- CDR23 connector assignment
- CDR23 control module function
- Terminating resistors on the CAN
- CAN comfort
- CD changer (CDC)
- Coding table
- Coding
- Data transfer fault
- Function of the components
- Gateway
- Identification
- Actual values
- MOST actual and required installed components lists
- MOST component check
- MOST lock/MOST unlock
- MOST - optical/electrical
- MOST unlock counter
- Ring break diagnosis line
- Input signals
- Single CD
- Drive links
- CDR23 control module
- External amplifier
- Wake-up function
- CDR23 fault overview
- 8001 CDR23
- 8004 CDR23
- 8005 CDR23
- 8007 CDR23
- 8009 CDR23
- 800A CDR23
- 800B CDR23
- 8013 CDR23
- 8014 CDR23
- 8015 CDR23
- 8016 CDR23
- CD changer - Introduction
- CD changer tools
- CD changer component arrangement
- CD changer connector assignment
- CD changer control module function
- Terminating resistors on the CAN
- CAN comfort
- CD changer (CDC)
- Coding
- Data transfer fault
- Extended fault memory
- Function of the components
- Gateway
- Identification
- Actual values
- Man Machine Interface (MMI)
- MOST actual and required installed components lists
- MOST component check
- MOST lock/MOST unlock
- MOST - optical/electrical
- MOST switch
- MOST unlock counter
- Navigation
- Ring break diagnosis line
- Input signals
- Single CD
- Voice control system (VOCS (optional))
- PCM2 control module (head unit).
- Telephone/telematics
- Tuner
- External amplifier
- Internal amplifier
- Wake-up function
- CD changer fault overview
- 8001 CD changer
- 8002 CD changer
- 8003 CD changer
- 8004 CD changer
- 8005 CD changer
- 8006 CD changer
- 8007 CD changer
- 8008 CD changer
- 8009 CD changer
- 800A CD changer
- 800B CD changer
- 8011 CD changer