MOST component check: Notes
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2005 Porsche 911, 2004 Porsche 911, 2003 Porsche 911, 2002 Porsche 911, and 2001 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
When there is a customer complaint or identifiable problems but no fault code entries, firstly the MOST component check is to be selected in the PCM2 function selection menu and then the MOST system check is to be carried out.
The MOST component check can be reached via the menu PCM2 function selection. This comprises a summary of the following check processes:
- MOST System check (ignition on.)
- Diagnosis, ring break diagnosis (ignition on.)
- Optical performance check.
- Data transmission check.
- MOST system check (with engine running).
- Ring break diagnosis (with engine running).
The MOST components check MOST system check is to be carried out when the display indicates unavailable MOST control modules. If no fault code is stored, the * symbol indicates a varying required and actual installed components list in the Control modules menu in front of the PCM2 system and in the PCM2 MMI function selection in front of the selection MOST required installed components list. A comparison of these two lists can determine missing components.