Coding country-specific tuner settings
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2005 Porsche 911, 2004 Porsche 911, 2003 Porsche 911, 2002 Porsche 911, and 2001 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
- Connect and start the Porsche System Tester II 9588 and switch on the ignition.
- Select 911 (996) in the Vehicle type menu and confirm with the "FORWORD" key.
- Select PCM in the Control modules menu and confirm with the "FORWORD" key.
- Select PCM2 GW in the 911 (996) PCM2 function selection and confirm with the "FORWORD" key.
- Select Coding in the 911 (996) PCM2 GW function selection and confirm with the "FORWORD" key.
- Select Tuner parameters in the PCM2 GW coding function selection and confirm with the "FORWORD" key.
- Take the country-specific code as it appears in the table, enter it in the form and code with the "F8" key.