Optical performance check
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2005 Porsche 911, 2004 Porsche 911, 2003 Porsche 911, 2002 Porsche 911, and 2001 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
OPTICAL PERFORMANCE CHECK
| Menu item |
Function |
- Optical performance check
|
The optical performance check allows the performance of the MOST to be checked optically. The following checks are carried out automatically:
- MOST installed components list (required and actual installed components list) is analysed.
- External MOST components display.
- Carrying out the performance check.
- The result is displayed by the tester.
- Connect and start the Porsche System Tester II 9588 and switch on the ignition.
- Select 911 (996) in the Vehicle type menu and confirm with the "FORWORD" key.
- Select PCM2 in the Control modules menu and confirm with the "FORWORD" key.
- Select MOST components check in the PCM2 function selection and confirm with the "FORWORD" key.
- Select Optical performance check
in the 911 (996) PCM2 MOST components check function selection and confirm with the "FORWORD" key.
- Follow the Tester instructions.
|