LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2011 >> 911 Speedster >> Repair and Diagnosis >> External Pages >> Different car >> Section 8 (Radio, Navigation & Pcm Diagnosis - 911 CARRERA (996)) >> PCM2 gateway - Introduction >> Vehicle hand-over

Vehicle hand-over

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2005 Porsche 911, 2004 Porsche 911, 2003 Porsche 911, 2002 Porsche 911, and 2001 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.

The PCM2 is converted to delivery mode (low-current mode) in production. As known from other systems (alarm system, instrument cluster, roll-over bar), the PCM2 must be activated with the Porsche System Tester II 9588.

  1. Connect and start the Porsche System Tester II 9588 and switch on the ignition.
  2. Select Special functions in the Vehicle type menu and confirm with the "FORWORD" key.
  3. Select Vehicle hand-over in the Control modules menu and confirm with the "FORWORD" key.
  4. Follow the instructions of the Porsche System Tester II 9588.
scientia non olet · About LEMON Manuals