LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2011 >> 911 Speedster >> Repair and Diagnosis >> External Pages >> Different car >> Section 8 (Radio, Navigation & Pcm Diagnosis - 911 CARRERA (996)) >> 8002 PCM2 - gateway >> Diagnosis/troubleshooting on the PCM2

Diagnosis/troubleshooting on the PCM2

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2005 Porsche 911, 2004 Porsche 911, 2003 Porsche 911, 2002 Porsche 911, and 2001 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
TROUBLESHOOTING ON PCM2

Work instruction Display OK If not OK
1 Read out fault memory.
  • Connect and start the Porsche System Tester II 9588 and switch on the ignition.
  • Select 911 (996) in the Vehicle type menu and confirm with the "FORWORD" key.
  • Select PCM in the Control units menu and confirm with the "FORWORD" key.
  • Select PCM2 GW in the PCM2 function selection and confirm with the "FORWORD" key.
  • Start Fault memory in the menu using the "FORWORD" key.
  • Read out fault memory.
  • Erase fault memory.
  • Remove ignition key and switch on ignition again.
  • Read out fault memory.
  • Extract ambient data, press the "FORWORD" key.
 The fault is remedied
-> End		 Fault code is still displayed
Step 2
2 Replace PCM2 The fault is remedied
-> End		  
scientia non olet · About LEMON Manuals