LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2011 >> 911 Speedster >> Repair and Diagnosis >> External Pages >> Different car >> Section 8 (Radio, Navigation & Pcm Diagnosis - 911 CARRERA (996)) >> PCM2 gateway - Introduction >> Production mode

Production mode

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2005 Porsche 911, 2004 Porsche 911, 2003 Porsche 911, 2002 Porsche 911, and 2001 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.

If the MOST control module is set to Production mode on, it is in low-current mode. This status is indicated by the message PROTECTED on the display. The control module cannot function. If production mode is coded out, the control module is operational again following a restart (vehicle must be locked and secured).

The following options can be coded: