Control module function - external BOSE amplifier: Coding
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2005 Porsche 911, 2004 Porsche 911, 2003 Porsche 911, 2002 Porsche 911, and 2001 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
Under the menu item Modify coding, the PCM2 codes can be coded on a vehicle and country-specific basis.
PCM2 CODING - VEHICLE AND COUNTRY
| Menu item |
Function |
- Vehicle type vehicle coding
|
The external BOSE amplifier corresponding to the vehicle type can be coded using this menu item.
- Connect and start the Porsche System Tester II 9588 and switch on the ignition.
- Select 911 (996) in the Vehicle type menu and confirm with the "FORWORD" key.
- Select PCM in the Control modules menu and confirm with the "FORWORD" key.
- Select External BOSE amplifier
in the 911 (996) PCM2 function selection and confirm with the "FORWORD" key.
- Select Coding
in the 911 (996) external BOSE amplifier function selection and confirm with the "FORWORD" key.
- Select 911 (996)
in the menu and code with the F8 key.
|
- Vehicle version vehicle coding
|
Under this menu item, the external BOSE amplifier corresponding to the vehicle version can be coded.
- Connect and start the Porsche System Tester II 9588 and switch on the ignition.
- Select 911 (996) in the Vehicle type menu and confirm with the "FORWORD" key.
- Select PCM in the Control module menu and confirm with the "FORWORD" key.
- Select External BOSE amplifier in the 911 (996) PCM2 function selection and confirm with the "FORWORD" key.
- Select Vehicle version vehicle coding in the 911 (996) external BOSE amplifier function selection and confirm with the "FORWORD" key.
- Select the relevant version Coupe, Cabrio, Targa in the menu and code with the F8 key.
|
- Right/left-hand drive vehicle coding
|
Under this menu item, the PCM2 GW corresponding to the vehicle version can be coded.
- Connect and start the Porsche System Tester II 9588 and switch on the ignition.
- Select 911 (996) in the Vehicle type menu and confirm with the "FORWORD" key.
- Select PCM in the Control modules menu and confirm with the "FORWORD" key.
- Select External BOSE amplifier in the 911 (996) PCM2 function selection and confirm with the "FORWORD" key.
- Select Coding in the 911 (996) external BOSE amplifier function selection and confirm with the "FORWORD" key.
- Select Right/left-hand drive vehicle coding
in the 911 (996) external BOSE amplifier function selection and confirm with the "FORWORD" key.
- Select Right or left-hand drive
in the menu corresponding to the vehicle equipment and code with the F8 key.
|