LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2011 >> 911 Speedster >> Repair and Diagnosis >> External Pages >> Different car >> Section 8 (Radio, Navigation & Pcm Diagnosis - 911 CARRERA (996)) >> PCM2 gateway - Introduction >> Coding PCM2

Coding PCM2

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2005 Porsche 911, 2004 Porsche 911, 2003 Porsche 911, 2002 Porsche 911, and 2001 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
  1. Connect and start the Porsche System Tester II 9588 and switch on the ignition.
  2. Select 911 (996) in the Vehicle type menu and confirm with the "FORWORD" key.
  3. Select PCM in the Control modules menu and confirm with the "FORWORD" key.
  4. Select PCM2 GW in the 911 PCM2 function selection and confirm with the "FORWORD" key.
  5. Select Coding in the PCM2 GW function selection and confirm with the "FORWORD" key.
  6. Select PCM2 code in the PCM2 GW coding function selection and confirm with the "FORWORD" key.
  7. Take the PCM2 code from IPAS, enter it in the form and code with the "F8" key.
scientia non olet · About LEMON Manuals