CD changer control module function: Coding

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2005 Porsche 911, 2004 Porsche 911, 2003 Porsche 911, 2002 Porsche 911, and 2001 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.

The PCM2 can be coded as required under the menu item Modify coding.

PCM2 CODING

Menu item	Function
PCM2 code	Under this menu item, the PCM2 code can be coded after replacing the PCM2. Connect and start the Porsche System Tester II 9588 and switch on the ignition. Select 911 (996) in the Vehicle type menu and confirm with the "FORWORD" key. Select PCM in the Control modules menu and confirm with the "FORWORD" key. Select PCM2 GW in the 911 (996) PCM2 function selection and confirm with the "FORWORD" key. Select menu item Coding Select menu item PCM2 code Take the PCM2 code from IPAS, enter it in the mask and code it with the "F8" key.
Country coding	Using this menu item, you can code the country code. Connect and start the Porsche System Tester II 9588 and switch on the ignition. Select 911 (996) in the Vehicle type menu and confirm with the "FORWORD" key. Select PCM in the Control modules menu and confirm with the "FORWORD" key. Select PCM2 GW in the 911 (996) PCM2 function selection and confirm with the "FORWORD" key. Select the coding menu item and confirm with the "FORWORD" key. Select the menu item Country coding and confirm with the "FORWORD" key. Select the relevant country coding from the menu item that is displayed and code it with the "F8" key.

Menu item

Function

PCM2 code

Under this menu item, the PCM2 code can be coded after replacing the PCM2.

Connect and start the Porsche System Tester II 9588 and switch on the ignition.
Select 911 (996) in the Vehicle type menu and confirm with the "FORWORD" key.
Select PCM in the Control modules menu and confirm with the "FORWORD" key.
Select PCM2 GW in the 911 (996) PCM2 function selection and confirm with the "FORWORD" key.
Select menu item Coding
Select menu item PCM2 code
Take the PCM2 code from IPAS, enter it in the mask and code it with the "F8" key.

Country coding

Using this menu item, you can code the country code.

Connect and start the Porsche System Tester II 9588 and switch on the ignition.
Select 911 (996) in the Vehicle type menu and confirm with the "FORWORD" key.
Select PCM in the Control modules menu and confirm with the "FORWORD" key.
Select PCM2 GW in the 911 (996) PCM2 function selection and confirm with the "FORWORD" key.
Select the coding menu item and confirm with the "FORWORD" key.
Select the menu item Country coding and confirm with the "FORWORD" key.
Select the relevant country coding from the menu item that is displayed and code it with the "F8" key.