LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2011 >> 911 Speedster >> Repair and Diagnosis >> External Pages >> Different car >> Section 8 (Radio, Navigation & Pcm Diagnosis - 911 CARRERA (996)) >> Telephone/telematics control module function >> Actual values

Actual values

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2005 Porsche 911, 2004 Porsche 911, 2003 Porsche 911, 2002 Porsche 911, and 2001 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.

The following can be read out under the Actual values menu item:

ACTUAL VALUES MENU ITEMS

Menu item Function
  • Transmission errors
 You can read out all transmission errors using this menu item.
  • Connect and start the Porsche System Tester II 9588 and switch on the ignition.
  • Select 911 (996) in the Vehicle type menu and confirm with the "FORWORD" key.
  • Select PCM in the Control units menu and confirm with the "FORWORD" key
  • Select Telephone/telematics in the 911 (996) PCM2 function selection and confirm with the "FORWORD" key.
  • Select Actual values in the 911 (996) telephone/telematics function selection and confirm with the "FORWORD" key.
  • Select Transmission errors in the 911 (996) telephone/telematics actual values function selection and confirm with the "FORWORD" key.
  • Read out values from the display field.
  • MOST unlock counter
 You can read out the MOST unlock counters using this menu item.
  • Connect and start the Porsche System Tester II 9588 and switch on the ignition.
  • Select 911 (996) in the Vehicle type menu and confirm with the "FORWORD" key.
  • Select PCM in the Control units menu and confirm with the "FORWORD" key
  • Select Telephone/telematics in the 911 (996) PCM2 function selection and confirm with the "FORWORD" key.
  • Select Actual values in the 911 (996) telephone/telematics function selection and confirm with the "FORWORD" key.
  • Select MOST unlock counter in the 911 (996) telephone/telematics actual values function selection and confirm with the "FORWORD" key.
  • Read out values from the display field.
  • Signal strength
 You can read out the signal strength using this menu item.
  • Connect and start the Porsche System Tester II 9588 and switch on the ignition.
  • Select 911 (996) in the Vehicle type menu and confirm with the "FORWORD" key.
  • Select PCM in the Control units menu and confirm with the "FORWORD" key
  • Select Telephone/telematics in the 911 (996) PCM2 function selection and confirm with the "FORWORD" key.
  • Select Actual values in the 911 (996) telephone/telematics function selection and confirm with the "FORWORD" key.
  • Select Signal strength in the 911 (996) telephone/telematics actual values function selection and confirm with the "FORWORD" key.
  • Read out values from the display field.
  • Supply voltage
 You can read out the supply voltage using this menu item.
  • Connect and start the Porsche System Tester II 9588 and switch on the ignition.
  • Select 911 (996) in the Vehicle type menu and confirm with the "FORWORD" key.
  • Select PCM in the Control units menu and confirm with the "FORWORD" key
  • Select Telephone/telematics in the 911 (996) PCM2 function selection and confirm with the "FORWORD" key.
  • Select Actual values in the 911 (996) telephone/telematics function selection and confirm with the "FORWORD" key.
  • Select Supply voltage in the 911 (996) telephone/telematics actual values function selection and confirm with the "FORWORD" key.
  • Read out values from the display field.
scientia non olet · About LEMON Manuals