LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2011 >> 911 Speedster >> Repair and Diagnosis >> External Pages >> Different car >> Section 8 (Radio, Navigation & Pcm Diagnosis - 911 CARRERA (996)) >> CDR23 control module function >> Coding

CDR23 control module function: Coding

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2005 Porsche 911, 2004 Porsche 911, 2003 Porsche 911, 2002 Porsche 911, and 2001 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.

Under the menu item Modify coding, the PCM2 codes can be coded on a vehicle and country-specific basis.

PCM2 CODING - VEHICLE & COUNTRY

Menu item Function
  • Vehicle type vehicle coding
 The CDR23 can be coded in accordance with the vehicle type using this menu item.
  • Connect and start the Porsche System Tester II 9588 and switch on the ignition.
  • Select 911 (996) in the Vehicle type menu and confirm with the "FORWORD" key.
  • Select PCM in the Control module menu and confirm with the "FORWORD" key.
  • Select CDR23 in the 911 (996) PCM2 function selection and confirm with the "FORWORD" key.
  • Select Coding in the 911 (996) CDR23 function selection and confirm with the "FORWORD" key.
  • Select Vehicle type vehicle coding in the Coding menu and confirm with the "FORWORD" key.
  • Select 911 (996) in the menu and code with the "F8" key.
  • Vehicle version vehicle coding
 The CDR23 can be coded in accordance with the vehicle version using this menu item.
  • Connect and start the Porsche System Tester II 9588 and switch on the ignition.
  • Select 911 (996) in the Vehicle type menu and confirm with the "FORWORD" key.
  • Select PCM in the Control module menu and confirm with the "FORWORD" key.
  • Select CDR23 in the 911 (996) PCM2 function selection and confirm with the "FORWORD" key.
  • Select Coding in the PCM2 GW function selection and confirm with the "FORWORD" key.
  • Select Vehicle version vehicle coding in the Coding menu and confirm with the "FORWORD" key.
  • Select 911 (996)  in the menu and code with the "F8" key.
  • Right/left-hand drive vehicle coding:
 The CDR23 can be coded in accordance with the vehicle model using this menu item.
  • Connect and start the Porsche System Tester II 9588 and switch on the ignition.
  • Select 911 (996) in the Vehicle type menu and confirm with the "FORWORD" key.
  • Select PCM in the Control modules menu and confirm with the "FORWORD" key.
  • Select CDR23 in the 911 (996) PCM2 function selection and confirm with the "FORWORD" key.
  • Select Coding in the 911 (996) CDR23 function selection and confirm with the "FORWORD" key.
  • Select Right/left-hand drive vehicle coding  in the 911 (996) CDR23 coding function selection and confirm with the "FORWORD" key.
  • Select Right/left-hand drive  from the menu item that is displayed and code it with the "F8" key.

The following selection is available:
  • Right-hand drive
  • Left-hand drive
  • Air conditioning with/without
 You can code the relevant vehicle version with or without air conditioning using this menu item.
  • Connect and start the Porsche System Tester II 9588 and switch on the ignition.
  • Select 911 (996) in the Vehicle type menu and confirm with the "FORWORD" key.
  • Select PCM in the Control modules menu and confirm with the "FORWORD" key.
  • Select CDR23 in the 911 (996) PCM2 function selection and confirm with the "FORWORD" key.
  • Select Coding in the 911 (996) CDR23 function selection and confirm with the "FORWORD" key.
  • Select Air conditioning with/without  in the 911 (996) CDR23 coding function selection and confirm with the "FORWORD" key.
  • Select with or without in the menu corresponding to the vehicle equipment and code with the "F8" key.
  • GAL (noise-dependent loudspeaker boost - NLB)
 You can code the LNB as required using this menu item.
  • Connect and start the Porsche System Tester II 9588 and switch on the ignition.
  • Select 911 (996) in the Vehicle type menu and confirm with the "FORWORD" key.
  • Select PCM in the Control modules menu and confirm with the "FORWORD" key.
  • Select CDR23 in the 911 (996) PCM2 function selection and confirm with the "FORWORD" key.
  • Select Coding in the 911 (996) CDR23 function selection and confirm with the "FORWORD" key.
  • Select GAL (LNB)  in the 911 (996) CDR23 coding function selection and confirm with the "FORWORD" key.
  • Select Value corresponding to the desired volume and code with the "F8" key.
  • Country coding
 You can code the country code using this menu item.
  • Connect and start the Porsche System Tester II 9588 and switch on the ignition.
  • Select 911 (996) in the Vehicle type menu and confirm with the "FORWORD" key.
  • Select PCM in the Control modules menu and confirm with the "FORWORD" key.
  • Select CDR23 in the 911 (996) PCM2 function selection and confirm with the "FORWORD" key.
  • Select Coding in the 911 (996) CDR23 function selection and confirm with the "FORWORD" key.
  • Select Country coding in the CDR23 coding function selection and confirm with the "FORWORD" key.
  • Select RoW or USA  and code with the "F8" key.
  • PCM2 code
 It is possible to code the PCM2 code under this menu item after replacing the CDR23.
  • Connect and start the Porsche System Tester II 9588 and switch on the ignition.
  • Select 911 (996) in the Vehicle type menu and confirm with the "FORWORD" key.
  • Select CDR23 in the Control modules menu and confirm with the "FORWORD" key.
  • Select Coding in the 911 (996) CDR23 function selection and confirm with the "FORWORD" key.
  • Select CDR23 code in the CDR23 coding function selection and confirm with the "FORWORD" key.
  • Take the PCM2 code from IPAS, enter it using the arrow keys and code it with the "F8" key.
  • Production mode
 You can code the production mode using this menu item.
  • Connect and start the Porsche System Tester II 9588 and switch on the ignition.
  • Select 911 (996) in the Vehicle type menu and confirm with the "FORWORD" key.
  • Select PCM in the Control modules menu and confirm with the "FORWORD" key.
  • Select CDR23 in the 911 (996) PCM2 function selection and confirm with the "FORWORD" key.
  • Select Coding in the 911 (996) CDR23 function selection and confirm with the "FORWORD" key.
  • Select Production mode in the 911 (996) CDR23 coding function selection and confirm with the "FORWORD" key.
  • Select Production mode ON/OFF in the CDR23 coding function selection and confirm with the "F8" key.
  • Tuner parameters
 You can code the tuner parameters using this menu item.
  • Connect and start the Porsche System Tester II 9588 and switch on the ignition.
  • Select 911 (996) in the Vehicle type menu and confirm with the "FORWORD" key.
  • Select PCM in the Control modules menu and confirm with the "FORWORD" key.
  • Select CDR23 in the 911 (996) PCM2 function selection and confirm with the "FORWORD" key.
  • Select Coding in the 911 (996) CDR23 function selection and confirm with the "FORWORD" key.
  • Select Tuner parameters in the 911 (996) CDR23 coding function selection and confirm with the "FORWORD" key.
  • Select the required tuner parameters in the CDR23 Modify coding function selection and confirm with the "F8" key.
  • Traffic broadcast loudspeaker boost
 You can code the traffic broadcast loudspeaker boost using this menu item.
  • Connect and start the Porsche System Tester II 9588 and switch on the ignition.
  • Select 911 (996) in the Vehicle type menu and confirm with the "FORWORD" key.
  • Select PCM2 in the Control modules menu and confirm with the "FORWORD" key.
  • Select CDR23 in the 911 (996) PCM2 function selection and confirm with the "FORWORD" key.
  • Select Coding in the 911 (996) CDR23 function selection and confirm with the "FORWORD" key.
  • Select Traffic broadcast loudspeaker boost in the 911 (996) CDR23 coding function selection and confirm with the "FORWORD" key.
  • Use the arrow keys to select the required traffic broadcast loudspeaker boost in the CDR23 Modify coding function selection and confirm with the "F8" key.
scientia non olet · About LEMON Manuals