LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2011 >> 911 Speedster >> Repair and Diagnosis >> External Pages >> Different car >> Section 8 (Radio, Navigation & Pcm Diagnosis - 911 CARRERA (996)) >> Control module function - external Harman amplifier >> Actual values

Actual values

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2005 Porsche 911, 2004 Porsche 911, 2003 Porsche 911, 2002 Porsche 911, and 2001 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.

It is possible to read out the following values under the Actual values menu item:

ACTUAL VALUES

Menu item Function
  • Vehicle speed
 You can read out the speed during troubleshooting under this menu item.
  • Connect and start the Porsche System Tester II 9588 and switch on the ignition.
  • Select 911 (996) in the Vehicle type menu and confirm with the "FORWORD" key.
  • Select PCM in the Control modules menu and confirm with the "FORWORD" key.
  • Select External Harman amplifier in the 911 (996) PCM2 function selection and confirm with the "FORWORD" key.
  • Select Actual values in the 911 (996) external Harman amplifier function selection and confirm with the "FORWORD" key.
  • Select Speed in the 911 (996) external Harman amplifier actual values function selection and confirm with the "FORWORD" key.
  • Read out values from the display field.
  • Transmission errors
 Under this menu item, it is possible to check the electrical and optical MOST during troubleshooting.
  • Connect and start the Porsche System Tester II 9588 and switch on the ignition.
  • Select 911 (996) in the Vehicle type menu and confirm with the "FORWORD" key.
  • Select PCM in the Control modules menu and confirm with the "FORWORD" key.
  • Select External Harman amplifier in the 911 (996) PCM2 function selection and confirm with the "FORWORD" key.
  • Select Actual values in the 911 (996) external Harman amplifier function selection and confirm with the "FORWORD" key.
  • Select Transmission errors in the 911 (996) external Harman amplifier actual values function selection and confirm with the "FORWORD" key.
  • Read out values from the display field.
  • Unlock counter
 Under this menu item, it is possible to check the electrical and optical MOST during troubleshooting.
  • Connect and start the Porsche System Tester II 9588 and switch on the ignition.
  • Select 911 (996) in the Vehicle type menu and confirm with the "FORWORD" key.
  • Select PCM in the Control modules menu and confirm with the "FORWORD" key.
  • Select External Harman amplifier in the 911 (996) PCM2 function selection and confirm with the "FORWORD" key.
  • Select Actual values in the 911 (996) external Harman amplifier function selection and confirm with the "FORWORD" key.
  • Select the Unlock counter  menu item using the > key and confirm with the "FORWORD" key.
  • Read out values from the display field.
  • Supply voltage
 You can check the supply voltage of the external Harman amplifier during troubleshooting using this menu item.
  • Connect and start the Porsche System Tester II 9588 and switch on the ignition.
  • Select 911 (996) in the Vehicle type menu and confirm with the "FORWORD" key.
  • Select PCM in the Control modules menu and confirm with the "FORWORD" key.
  • Select External Harman amplifier in the 911 (996) PCM2 function selection and confirm with the "FORWORD" key.
  • Select Actual values in the 911 (996) external Harman amplifier function selection and confirm with the "FORWORD" key.
  • Select Supply voltage in the 911 (996) external Harman amplifier actual values function selection and confirm with the "FORWORD" key.
  • Read out values from the display field.
scientia non olet · About LEMON Manuals