Section 126 (21 - Exhaust Gas Turbocharging -- CARRERA (997))

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.

WM 211019 Removing And Installing Air Guide For Charge Air Cooler (Turbo Coupe, Turbo S Coupe, Turbo CABRIO & Turbo S CABRIO
- Technical Values
- Preliminary Work
- Removing Air Guide For Charge Air Cooler
- Installing Air Guide For Charge Air Cooler
- Subsequent Work
WM 213019 Removing And Installing Turbocharger (Turbo Coupe, Turbo S Coupe, Turbo CABRIO & Turbo S CABRIO)
- Tools
- Technical Values
- Preliminary Work
- Removing Turbocharger
  - Removing Turbocharger For Cylinder Bank 1-3
  - Removing Turbocharger For Cylinder Bank 4-6
- Installing Turbocharger
  - Installing Turbocharger For Cylinder Bank 1-3
  - Installing Turbocharger For Cylinder Bank 4-6
- Subsequent Work
WM 213019 Removing And Installing Turbocharger (Gt2 RS)
- Technical Values
- Information
  - Component overview
- Preliminary Work
- Removing Turbocharger
  - Removing Turbocharger For Cylinder Bank 1-3
  - Removing Turbocharger For Cylinder 4-6
- Installing Turbocharger
  - Installing Turbocharger For Cylinder 1-3
  - Installing Turbocharger For Cylinder 4-6
- Subsequent Work
WM 2130N0 Greasing Ball Joints On Adjustment Mechanism (Turbo Coupe, Turbo S Coupe, Turbo CABRIO & Turbo S CABRIO)
- Tools
- Greasing Ball Joints
WM 214019 Removing And Installing Recirculating Air Valve - Turbo (Turbo Coupe, Turbo S Coupe, Turbo CABRIO & Turbo S CABRIO)
- Preliminary Work
- Component Information
- Removing Recirculating Air Valve
- Installing Recirculating Air Valve
- Subsequent Work
WM 214119 Removing And Installing Pressure Pipe (Turbo Coupe, Turbo S Coupe, Turbo CABRIO & Turbo S CABRIO)
- Technical Values
- Removing Pressure Pipe
  - Component overview
- Installing Pressure Pipe
WM 214119 Removing And Installing Pressure Pipe (Gt2 RS)
- Technical values
- Information
  - Overview
  - Removing Pressure Pipe
- Installing Pressure Pipe
  - Installing Pressure Pipe
WM 214319 Removing And Installing Charge Air Cooler (Turbo Coupe & Turbo CABRIO)
- Tools
- Technical Values
- Preliminary Work
- Removing Charge Air Cooler
- Installing Charge Air Cooler
- Subsequent Work
WM 214319 Removing And Installing Charge-Air Cooler (Gt2 RS)
- Technical Values
- Preliminary Work
- Removing Charge-Air Cooler
- Installing Charge-Air Cooler
- Subsequent Work
WM 216420 Removing And Installing Exhaust Temperature Sensors (Turbo Coupe, Turbo S Coupe, Turbo CABRIO & Turbo S CABRIO)
- Tools
- Technical Values
- Preliminary Work
- Removing Exhaust Temperature Sensors
- Installing Exhaust Temperature Sensors
- Subsequent Work
WM 216420 Removing And Installing Exhaust Temperature Sensor (Gt2 RS)
- Technical Values
- Information
  - Installation Overview
- Preliminary Work
- Removing Exhaust Temperature Sensor
  - Removing Exhaust Temperature Sensor
- Installing Exhaust Temperature Sensor
  - Installing Exhaust Temperature Sensor
- Subsequent Work
WM 216619 Removing And Installing Electronic Adjuster For Turbocharger (Turbo Coupe, Turbo S Coupe, Turbo CABRIO & Turbo S CABRIO)
- Technical Values
- Preliminary Work
- Removing Electronic Adjuster
  - Removing Electronic Adjuster - Cylinder Bank 1-3
  - Removing Electronic Adjuster - Cylinder Bank 4-6
- Installing Electronic Adjuster For Turbocharger
  - Installing Electronic Adjuster - Cylinder Bank 1-3
  - Installing Electronic Adjuster - Cylinder Bank 4-6
- Subsequent Work
WM 216619 Removing And Installing Electronic Adjuster For Turbocharger (Gt2 RS)
- Technical Values
- Preliminary Work
- Removing Turbocharger Electronic Adjuster
  - Removing Electronic Adjuster For Turbocharger, Cylinder Bank 1-3
  - Removing Electronic Adjuster For Turbocharger, Cylinder Bank 4-6
- Installing Turbocharger Electronic Adjuster
  - Installing Electronic Adjuster For Turbocharger, Cylinder Bank 1-3
  - Installing Electronic Adjuster For Turbocharger, Cylinder Bank 4-6
- Subsequent Work
WM 216655 Replacing Actuating Rod For Turbocharger Electronic Adjuster (Turbo Coupe, Turbo S Coupe, Turbo CABRIO & Turbo S CABRIO)
- Removing Actuating Rod For Turbocharger Electronic Adjuster
- Installing Actuating Rod For Turbocharger Electronic Adjuster
WM 217119 Removing And Installing Oil Feed Line (Turbo Coupe, Turbo S Coupe, Turbo CABRIO & Turbo S CABRIO)
- Tools
- Technical Values
- Preliminary Work
- Removing Oil Feed Line
  - Removing Oil Feed Line - Cylinder Bank 1-3
  - Removing Oil Feed Line - Cylinders 4-6
- Installing Oil Feed Line
  - Installing Oil Feed Line - Cylinder Bank 1-3
  - Installing Oil Feed Line - Cylinder Bank 4-6
- Subsequent Work
WM 217119 Removing And Installing Oil Pressure Line For Turbocharger (Gt2 RS)
- Tools
- Technical Values
- Preliminary Work
  - Overview Of Lines
- Removing Oil Pressure Line
  - Removing Oil Pressure Line On Cylinder Bank 1-3
  - Removing Oil Pressure Line On Cylinder Bank 4-6
- Installing Oil Pressure Line
  - Installing Oil Pressure Line - Cylinder Bank 1-3
  - Installing Oil Pressure Line - Cylinder Bank 4-6
- Subsequent Work
WM 217119 Removing And Installing Oil Pressure Line For Turbocharger (Turbo Coupe, Turbo CABRIO & Gt2)
- Tools
- Technical Values
- Preliminary Work
  - Overview Of Lines
- Removing Oil Pressure Line
  - Removing Oil Pressure Line - Cylinder Bank 1-3
  - Removing Oil Pressure Line - Cylinder Bank 4-6
- Installing Oil Pressure Line
  - Installing Oil Pressure Line - Cylinder Bank 1-3
  - Installing Oil Pressure Line - Cylinder Bank 4-6
- Subsequent Work
WM 217519 Removing And Installing Turbocharger Oil Tank (Turbo Coupe, Turbo S Coupe, Turbo CABRIO & Turbo S CABRIO)
- Technical Values
- Preliminary Work
- Removing Turbocharger Oil Tank
- Installing Turbocharger Oil Tank
- Subsequent Work
WM 217519 Removing And Installing Turbocharger Oil Tank (Gt2 RS)
- Technical Values
- Preliminary Work
- Removing And Installing Turbocharger Oil Tank
  - Removing Turbocharger Oil Tank
- Installing Turbocharger Oil Tank
- Subsequent Work
WM 217819 Removing And Installing Oil Return Line For Turbocharger (Turbo Coupe, Turbo S Coupe, Turbo CABRIO & Turbo S CABRIO)
- Technical Values
- Preliminary Work
- Removing Oil Return Line
- Installing Oil Return Line
- Subsequent Work
WM 217820 Removing And Installing Oil Return Line (Gt2 RS)
- Technical Values
- Information
  - Overview Of Oil Return Lines
- Preliminary Work
- Removing Oil Return Line
  - Removing Oil Return Line 1-3
  - Removing Oil Return Line 4-6
- Installing Oil Return Line
  - Installing Oil Return Line 1-3
  - Installing Oil Return Line 4-6
- Subsequent Work
WM 217820 Removing And Installing Oil Return Line (Turbo Coupe, Turbo CABRIO & Gt2)
- Technical Values
- Information
  - Overview Of Oil Return Lines
- Preliminary Work
- Removing Oil Return Line
  - Notes
  - Removing Oil Return Line 4-6
- Installing Oil Return Line
  - Installing Oil Return Line 1-3
  - Installing Oil Return Line 4-6
- Subsequent Work