Subsequent Work

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Heat protection panels not fitted correctly

Risk of damage to adjacent parts

→ Make sure the heat protection panels overlap correctly.

→ Replace damaged or deformed heat protection panels.

→ Check heat protection panels for deformation, secure fixing of the aluminum braided cord, cracks and missing or damaged fixing tabs.

→ At least 80% of the total sealing area must be sealed without gaps.

Install rear silencer.
→ 263319 REMOVING AND INSTALLING REAR SILENCER .
Install charge-air cooler.
→ 214319 REMOVING AND INSTALLING CHARGE-AIR COOLER - GT2 RS .
Fill in coolant up to the Max. marking on the coolant reservoir.
Check engine-oil level and top up with new engine oil if necessary.
→ 170101 CHECKING ENGINE-OIL LEVEL - GT2 RS .
Carry out a test drive. Check the coolant and oil level and correct it if necessary.