Technical Values
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Oil feed line to turbocharger 1-3 | M6 x 10 internal Torx | Tightening torque | 10 Nm (7.5 ft. lb.) | ||
| Upper oil feed line to turbocharger 1-3 | M6 x 10 internal Torx | Tightening torque | 10 Nm (7.5 ft. lb.) | ||
| Lower coolant line to turbocharger 1-3 | M6 x 10 internal Torx | Tightening torque | 10 Nm (7.5 ft. lb.) | ||
| Vent line to turbocharger 1-3 | M6 x 10 internal Torx | Tightening torque | 10 Nm (7.5 ft. lb.) | ||
| Coolant lines to bracket 1-3 | M6 x 12 external Torque | Tightening torque | 10 Nm (7.5 ft. lb.) | ||
| Oil feed line to cylinder head 1-3 | M6 x 12 external Torx | Tightening torque | 10 Nm (7.5 ft. lb.) | ||
| Holding clamp for oil feed line 1-3 | M6 x 12 external Torx screw | Tightening torque | 10 Nm (7.5 ft. lb.) | ||
| Intake manifold to turbocharger 1-3 | M6 x 12 external Torx | Tightening torque | 10 Nm (7.5 ft. lb.) | ||
| Oil feed line to turbocharger 4-6 | M6 x 10 internal Torx | Tightening torque | 10 Nm (7.5 ft. lb.) | ||
| Lines on turbocharger 4-6 | M6 x 10 internal Torx | Tightening torque | 10 Nm (7.5 ft. lb.) | ||
| Coolant line to bracket 4-6 | M6 x 12 external Torx | Tightening torque | 10 Nm (7.5 ft. lb.) | ||
| Oil feed line to cylinder head 4-6 | M6 x 12 external Torque | Tightening torque | 10 Nm (7.5 ft. lb.) | ||
| Holding clamp for oil feed line 4-6 | M6 x 12 external Torx screw | Tightening torque | 10 Nm (7.5 ft. lb.) | ||
| Intake manifold to turbocharger 4-6 | M6 x 12 external Torx | Tightening torque | 10 Nm (7.5 ft. lb.) |