Technical Values
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Cover for charge air guide | Shouldered bolt, M6 x 18 | Tightening torque | 10 Nm (7.5 ft. lb.) | ||
| Cover for charge air guide | M6 collar nut | Tightening torque | 3 Nm (2 ft. lb.) | ||
| Charge air guide | M8 collar nut | Tightening torque | 23 Nm (17 ft. lb.) | ||
| Air guide at entrance to air intake duct | Tapping screw | Tightening torque | 3 Nm (2 ft. lb.) |