Technical Values
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Oil and coolant lines on turbocharger | External and internal Torx screws, M6 | Tightening torque | 10 Nm (7.5 ft. lb.) | ||
| Oil return line to turbocharger | External Torx screw, M6 x 12 | Tightening torque | 10 Nm (7.5 ft. lb.) | ||
| Union nut securing exhaust temperature sensor to turbocharger | M12 (a/f 14), grease with Optimol MF paste | Tightening torque | 35 Nm (26 ft. lb.) | +/-3 Nm (+/- 2 ft. lb.) | |
| Holding clamp securing oil extraction line to tandem pump | External Torx screw, M6 x 16 | Tightening torque | 10 Nm (7.5 ft. lb.) | ||
| Turbocharger to exhaust manifold | Lock nut, M8 | Tightening torque | 25 Nm (19 ft. lb.) | ||
| Screw on turbocharger holder | External Torx screw, M8 x 16 | Tightening torque | 23 Nm (17 ft. lb.) | ||
| Intake pipe to turbocharger | External Torx screw, M6 x 20 | Tightening torque | 10 Nm (7.5 ft. lb.) | ||
| Heat shield to turbocharger | M6 collar nut | Tightening torque | 10 Nm (7.5 ft. lb.) | ||
| Oil and coolant lines on turbocharger | External and internal Torx screws, M6 | Tightening torque | 10 Nm (7.5 ft. lb.) | ||
| Oil return line to turbocharger | External Torx screw, M6 x 12 | Tightening torque | 10 Nm (7.5 ft. lb.) | ||
| Union nut securing exhaust temperature sensor to turbocharger | M12 (a/f 14), grease with Optimol MF paste | Tightening torque | 35 Nm (26 ft. lb.) | +/-3 Nm (+/- 2 ft. lb.) | |
| Holding clamp securing oil extraction line to tandem pump | External Torx screw, M6 x 16 | Tightening torque | 10 Nm (7.5 ft. lb.) | ||
| Turbocharger to exhaust manifold | Lock nut, M8 | Tightening torque | 25 Nm (19 ft. lb.) | ||
| Screw on turbocharger holder | External Torx screw, M8 x 16 | Tightening torque | 23 Nm (17 ft. lb.) | ||
| Intake pipe to turbocharger | External Torx screw, M6 x 20 | Tightening torque | 10 Nm (7.5 ft. lb.) |