5X - Body - General - 911 CARRERA (991)

• WM, 5X00IN01 Safety Instructions
  • Safety Instructions For Raising Vehicles
    • Danger Of Injury When Raising Vehicles
    • Damage When Raising Vehicles
  • General Warning Notes
    • Danger Of Injury While Welding
    • Safety Instructions For Dealing With Flying Sparks During Grinding And Welding Work
    • Safety Instructions For Grinding Work
    • Safety Instructions For Fuel Tank
    • Safety Instructions For Air Conditioning
  • Safety Instructions For Adhesive Bonding
    • Danger Of Poisoning And Injury When Using Adhesive
    • Safety Instructions For Teromix-6700 Two-Component Adhesive
  • Safety Instructions For Assembly Work
    • Safety Instructions For Sharp-Edged Body And Unit Parts
    • Safety Instructions For Airbag System
  • Safety Instructions For Corrosion Protection
    • Safety Instructions For Stopper Location Plan (Body)
• WM, 5X00IN02 Protection For Electric Components During Body Repairs
  • Information On Electronic Control Units
    • Notes
    • Protection Against Overvoltage When Performing Welding Work
    • Replacing Control Units
• WM, 5X00IN03 Corrosion Protection Measures During Repair Work
  • Measures For Maintaining Long-Term Body Protection
  • Prerequisite For Ensuring Validity Of The Long-Life Guarantee
    • Prerequisite For Maintaining The Long-Life Guarantee
      • Porsche Long-Life Guarantee Conditions
• WM, 5X00IN05 Information On Aluminium Repairs
  • Notes
  • List Of Materials
  • Damage Diagnosis
    • Damage Diagnosis On Aluminium Components
  • Repairs
    • Reshaping
    • Removing Dents On Accessories
  • Occupational Safety
    • Working On Surfaces
    • Corrosion Protection Measures
• WM, 5X00IN07 General Information And Notes On Quality
  • Notes
  • Battery Trickle Charge
    • Battery Trickle Charging
  • Information On Control Units
    • Information On Removing And Installing Control Units
    • Protection Against Overvoltage When Performing Welding Work
    • Information For Replacing Control Units
  • Information On Maintaining Long-Life Corrosion Protection Or The Long-Life Guarantee
    • Information On Maintaining Long-Life Corrosion Protection
    • Information On Maintaining The Long-Life Guarantee
• WM, 5X00IN08 Bonding log
• WM, 5X00IN10 Welding Aluminium
  • Notes
  • Welding Aluminium
• WM, 5X00IN11 Stud Welding
  • Notes
  • Preparing For Stud Welding
  • Welding Parameters
  • Welding Studs
• WM, 5X00IN20 Working With Body Structural Foam
  • Notes
  • General Information
    • Version
    • Safety Data Sheet
    • Shelf Life
    • Disposal
    • Bonding Log
  • Structural Foam In Body Building
  • Working With Body Structural Foam
    • General Information
    • Preparing Bonding Surfaces
      • Initial cleaning
      • Cleaning
    • Processing Conditions
    • Joining Process
    • Hardening
    • Assembly Strength
    • Endurance Strength
    • Corrosion Protection
    • Work Sample
• WM, 5X00IN21 Working With Body Structural Adhesive Pah.071.781.00
  • Notes
  • General Information
    • Notes
    • Safety Data Sheet
    • Shelf Life
    • Disposal
    • Bonding Log
  • Information On Structural Bonding In Vehicle Manufacturing
    • General
    • Combined Joining Processes
    • Separating Body Components
    • Welding In Body Components
  • Working With Body Structural Adhesive Pah.071.781.00
    • General Information
    • Preparing Bonding Surfaces
      • Initial cleaning
      • Cleaning
      • Sand/grind until Dare
    • Processing Conditions
    • Joining Process
    • Hardening
    • Assembly Strength
    • Endurance Strength
    • Corrosion Protection
    • Work Sample
• WM, 5X00IN22 Processing Body Foam Filler
  • Notes
  • General Information
    • Notes
    • Safety Data Sheet
    • Shelf Life
    • Disposal
    • Bonding Log
  • Foam Filler In Body Building
  • Processing Body Foam Filler
    • General Information
    • Preparing Bonding Surfaces
      • Initial cleaning
      • Cleaning
    • Processing Conditions
    • Joining Process
    • Hardening
    • Subsequent Work
    • Assembly And Endurance Strength
• WM, 5X00IN23 Replacing Punch Rivets And Penetrated Joints
  • Notes
  • General Information
  • Loosening Joint
    • Punch Rivets
    • Pressing Out Punch Rivets
    • Punch And Bottom Die Pairs
    • Pulling Punch Rivets
    • Penetrated Joints
    • Loosening Penetrated Joints
  • Making Joint
    • Setting Blind Rivets
    • Setting Flow-Form Rivets
• WM, 5X00IN24 Setting Self-Tapping Screws
  • Notes
  • General Information
    • Notes
    • Setting Self-Tapping Screws
• WM, 5X00IN25 Making Ground Connections
  • Notes
  • MaKING GROUND CONNECTION USING A THROUGH BOLT
  • Making Ground Connection Using A Rivet Nut
• WM, 5X00IN26 Replacing Coarse Threaded Bolts
  • Notes
  • Replacing Coarse Threaded Bolts
  • Subsequent Work
• WM, 5X00IN33 Thread Repairs For Threaded Bushes With Collar
  • Thread Repairs For Threaded Bushes With Collar
• WM, 5X00IN34 Thread Repairs For Threaded Bushes Without Collar
  • Notes
  • Repair Procedure For Threaded Bush Without Collar
• WM, 5X00IN41 Gap Dimension
  • Notes
  • Lighting
    • Gap Dimensions Of Main Headlights
    • Gap Dimensions Of Tail Lights
  • Windows
    • Gap Dimensions For Windscreen
    • Gap Dimensions Of Rear Window
  • Front
    • Gap Dimensions Of Front Lid
    • Gap Dimensions Of Front Wing
  • Gap Dimensions - Side
    • Gap Dimensions Of Front Door
    • Gap Dimensions Of Door Entry Guard
  • Rear
    • Gap Dimensions Of Rear Lid
    • Gap Dimension Of Convertible-Top Compartment Lid
    • Gap Dimensions Of Convertible-Top Compartment Lid
    • Gap Dimensions Of Lid To Air Intake Grille
    • Gap Dimensions For Rear Apron
    • Gap Dimensions Of Spoiler
    • Gap Dimensions Of Light Panel
• WM, 5X00IN42 Seam Seals
  • Notes
  • Add-On Parts
    • Instructions For Sealing Seams
    • Door
    • Rear Lid
  • Unpainted BODYSHELL
    • Upper Body Front Section
    • Upper Body Front Section, Front
    • Upper Body Front Section (Plenum Panel)
    • Body Front Section And Inner A-Pillar
    • Body Front Section And Outer A-Pillar
    • Side Of Body Front Section
    • Inner Body Front Section And Top Of Floor Seam
    • Lower Side Member And Top Of Floor
    • Wheel Housing And Upper Rear Side Section
    • Inner Rear Cross Member
    • Lower Body Front Section
    • Lower Side Member And Bottom Of Floor
    • Upper Rear End
    • Lower Rear End
    • Side Of Rear End
    • Roof
    • Roof Frame
• WM, 5X00IN43 Underbody Protection
  • Notes
  • Tools And Materials
    • Tools
    • Materials
    • Overview Diagram - Underbody Protection
    • Overview Diagram - Lower Body Front Section
    • Overview Diagram - Lower Side Member And Floor
    • Overview Diagram - Lower Rear End
• WM, 5X00IN44 Cavity Preservation
  • Add-On Parts
  • Door
  • Unpainted BODYSHELL
  • Upper Body Front Section
  • Bottom Of Front Of Vehicle
  • Side Member
  • Bottom Of Rear End
  • Top Of Rear End
• WM, 5X00IN45 Vehicle Identification Number
  • Notes
  • Re-Imprinting New Vehicle Identification Number
    • Information
    • Spacer For Replacing The Vehicle Identification Number
    • Encoding Vehicle Identification Number
• WM, 5X00IN61 Work Sequence For Accident Repairs
  • Work Sequence For Accident Repairs
  • Repairs
  • Replacement
• WM, 5X00IN62 Procedure For Damage Diagnosis
  • Notes
  • Procedure For Damage Diagnosis
  • Identifiable Deformations On The Body Structure
  • No Identifiable Deformations On The Body Structure
• WM, 5X00IN83 Connecting Elements For Body Repairs
  • Notes
  • Connecting Elements For Body Repairs
    • Rivets
    • Special Elements
    • Adhesive And Filler
• WM, 5X00IN99 Exterior Colours
  • Exterior Colours - Solid Paint System
  • Exterior Colours - Metallic Paint System
• WM, 5X00IN Technical Values
  • Notes
  • Technical Values
    • Wing
    • Front Wheel Housing Liner
    • Rear Wheel Housing Liner (At The Front)
    • Rear Wheel Housing Liner (At The Rear)
    • Underbody Panelling
    • Front Door
  • Technical Values For Door Arrester
  • Dashboard Bracket
  • Heating/Fresh-Air Unit
  • Technical Values - Lid
    • Lid Lock
    • Front Lid
    • Emergency Release
    • Rear Lid
  • Technical Values - Wing
    • Wing
• WM, 5X00IN04 Body Parts Of Various Sheet-Steel Strengths
  • List Of Materials
  • High-Strength Steel
  • Very-High-Strength Steel
  • Ultra-High-Strength Steel
  • Separation Points
  • Welding Work
• WM, 5X00IN29 Replacing Friction Element Welded Joint
  • Notes
  • General Information
  • Loosening Joint
    • Loosening Friction Element Welded Joints (Standard Friction Element)
    • Loosening Friction Element Welded Joints (Countersunk Head Friction Element)
  • Taking Joint
    • Setting Flow-Form Welding Rivets
• WM, 5X00IN46 Data Plates
  • Diagram: Data Plates
    • Rear And Left Side Of Vehicle
    • Shown On The Coupe
• WM, 5X00IN47 Diagram: Stopper Plan
  • Diagram: Stopper Plan
    • Upper Body Front Section
    • Top Side Of Body Front Section
    • Firewall On Left-Hand Drive Vehicle
    • Firewall On Right-Hand Drive Vehicle
    • Top Of Floor
    • Bottom Of Floor
    • A-Pillar And Side Panel
    • Roof Frame
    • Lower Rear End
    • Lower Body Front Section
    • Rear Wheel Housing And Lower Rear Side Member
    • Hood Compartment And Convertible Top Compartment
    • Front Lid
    • Rear Sealing Channel