WM, 5X00IN21 Working With Body Structural Adhesive Pah.071.781.00: Notes

TOOLS DESCRIPTION

Tool denomination	Type	Tool number	Image
hand-cartridge gun	Vehicle-specific workshop equipment	V.A.G1628	Courtesy of PORSCHE CARS NORTH AMERICA, INC.
V.A.G1628 Courtesy of PORSCHE CARS NORTH AMERICA, INC.
pneumatic gun	General workshop equipment	VAS 6648	Courtesy of PORSCHE CARS NORTH AMERICA, INC.
VAS 6648 Courtesy of PORSCHE CARS NORTH AMERICA, INC.
pneumatic cartridge gun	General workshop equipment	V.A.G 1761/1	Courtesy of PORSCHE CARS NORTH AMERICA, INC.
V.A.G 1761/1 Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Technical values 

Location	Description	Type	Basic value	Tolerance 1	Tolerance 2
Minimum processing temperature	PAH.071.781.00	Minimum temperature	15°C
Minimum temperature 15°C
Maximum processing temperature	PAH.071.781.00	Maximum temperature	35°C
Maximum temperature 35°C
Structural bonding	PAH.071.781.00	Processing time at 15°C	80 min
Processing time at 15°C 80 min
Structural bonding	PAH.071.781.00	Processing time at 18°C	75 min
Processing time at 18°C 75 min
Structural bonding	PAH.071.781.00	Processing time at 20°C	65 min
Processing time at 20°C 65 min
Structural bonding	PAH.071.781.00	Processing time at 23°C	60 min
Processing time at 23°C 60 min
Structural bonding	PAH.071.781.00	Processing time at 25°C	50 min
Processing time at 25°C 50 min
Structural bonding	PAH.071.781.00	Processing time at 30°C	40 min
Processing time at 30°C 40 min
Structural bonding	PAH.071.781.00	Processing time at 35°C	30 min
Processing time at 35°C 30 min
Applying adhesive	Spread out evenly	Application depth	0.5 mm
Application depth 0.5 mm
Maximum layer thickness		Layer thickness	1 mm
Layer thickness 1 mm
Minimum hardening temperature	PAH.071.781.00	Minimum temperature	18°C
Minimum temperature 18°C
Maximum hardening temperature	PAH.071.781.00	Maximum temperature	80°C
Maximum temperature 80°C
Assembly strength	PAH.071.781.00	Hardening time at 2: °C	3 12 h
Hardening time at 23°C 12 h
Assembly strength	PAH.071.781.00	Hardening time at 60°C	60 min
Hardening time at 60°C 60 min
Endurance strength	PAH.071.781.00	Standing time at 18°C	96 h
Standing time at 18°C 96 h