WM, 5X00IN24 Setting Self-Tapping Screws: Notes

PARTS DESCRIPTION

Part number	Description	Addition
99907391701	Lens-head screw 999.073.917.01 M5x20	M5x20
M5x20
99907354101	Lens-head screw 999.073.541.01 M6x20	M6x20
M6x20
PAF00654700	Hexagon-head bolt PAF.006.547.00 M5x20	M5x20
M5x20
PAF00709300	Hexagon-head bolt PAF.007.093.00 M5x25	M5x25
M5x25

TOOLS DESCRIPTION

Tool denomination	Type	Tool number	Image
FDS sockets	Vehicle-specific workshop equipment	VAS852007A	Courtesy of PORSCHE CARS NORTH AMERICA, INC.
VAS852 007A Courtesy of PORSCHE CARS NORTH AMERICA, INC.

TECHNICAL VALUES SPECIFICATIONS

Location	Description	Type	Basic value	Tolerance 1
Threaded joint		Tightening torque	6 N.m (4.5 ft.lb)	+/- 1 N.m (0.5 ft.lb)
Tightening torque 6 N.m (4.5 ft.lb) +/- 1 N.m (0.5 ft.lb)
Predrilled hole	Dimension X	Diameter	3.5 mm
Diameter 3.5 mm Courtesy of PORSCHE CARS NORTH AMERICA, INC. Hole geometry
Through-bore	Dimension Y	Diameter	7 mm
Diameter 7 mm Courtesy of PORSCHE CARS NORTH AMERICA, INC. Hole geometry
Threaded joint		Tightening torque	9.5 N.m (7 ft.lb)	+/- 1 N.m (0.5 ft.lb)
Tightening torque 9.5 N.m (7 ft.lb) +/- 1 N.m (0.5 ft.lb)
Predrilled hole	Dimension X	Diameter	4.7 mm
Diameter 4.7 mm Courtesy of PORSCHE CARS NORTH AMERICA, INC. Hole geometry
Through-bore	Dimension Y	Diameter	8 mm
Diameter 8 mm Courtesy of PORSCHE CARS NORTH AMERICA, INC. Hole geometry
Screw	Screw in as far as head contact surface	Torque angle	+ 90°
Torque angle + 90°
Pilot bore	Dimension X	Diameter	3.5 mm
Diameter 3.5 mm Courtesy of PORSCHE CARS NORTH AMERICA, INC. Hole geometry
Through-bore	Dimension Y	Diameter	7 mm
Diameter 7 mm Courtesy of PORSCHE CARS NORTH AMERICA, INC. Hole geometry
Screw	Screw in as far as head contact surface	Torque angle	+ 90°
Torque angle + 90°
Pilot bore	Dimension X	Diameter	3.5 mm
Diameter 3.5 mm Courtesy of PORSCHE CARS NORTH AMERICA, INC. Hole geometry
Through-bore	Dimension Y	Diameter	7 mm
Diameter 7 mm Courtesy of PORSCHE CARS NORTH AMERICA, INC. Hole geometry