Instrument Panel - Electronic
- Description
- Operation
- Testing
- Function Diagnostic Mode
- Quick Check Tests
- Pinpoint Tests
- Notes
- Test AH, Outside Temperature Always Reads 135-140°F (57-60°C)
- Test AL, Outside Temperature Always Reads -40°F (-40°C)
- Test AS, Outside Temperature Wrong, Not To Extreme High Or Low
- Test FA, Instantaneous Fuel Economy Or Average Fuel Economy Always Reads 0 Miles/Gallon Or 99L/100 KM Or 99 Miles/Gallon Or 0 L/100 KM
- Test FB, Trip Distance Does Not Accumulate
- Test FC, Distance To Empty (DTE) Does Not Go Below 200 Miles With Fuel Tank Empty
- Test FD, CO Displayed, Gauge Blanks Out Fuel Tank Symbol & Lights Top Two & Bottom Two Bars Of Fuel Gauge
- Test FE, CS Displayed, Gauge Blanks Out Fuel Tank Symbol & Lights Top Two & Bottom Two Bars Of Fuel Gauge
- Test FF, Inaccurate Fuel Indication - Full Not Indicated When Tank Is Full Or Empty Not Indicated When Tank Is Empty
- Test FG, Fuel Gauge Displays Only Top Two & Bottom Two Bars
- Test SA, Display Does Not Respond To Buttons - No Beep Sound When Buttons Pushed Or Driver Alert Given
- Test SB, Speedometer Reads 0 MPH At All Speeds With Vehicle In Motion
- Test SC, Speedometer Reads Constantly Too High Or Low
- Test SD, Speed Indication Jumps Erratically
- Test SE, Odometer Display Reads "Error"
- Test SF, Odometer Display Has "S" Illuminated
- Test SG, Odometer Does Not Accumulate Mileage Or Accumulates One Mile And Then Jumps Backward
- Test SH, Mileage Constantly Reads Too High Or Low
- Test SJ, Speed Control Indicator In Instrument Cluster Is Always On
- Pinpoint Test SK, Speed Control Indicator In Instrument Cluster Does Not Come On
- Test TA, Display Not Illuminated Too Dim Or Totally Black
- Test TB, Display Scrambled, Segments Half Lit, Segments Blinking Or Missing, Display Incorrect, Display Stuck With All Segments On
- Test TC, Temperature Gauge Display Blanks Out Thermometer Symbol & Lights Top Two And Bottom Two Bars
- Test TD, Temperature Gauge Always Indicates Cold Temperature (Bottom Bar Lit)
- Test TX, No Warning Tone When Thermometer Symbol Is Blinking
- Test WA, Ground Input Warning Never Or Always Comes On
- Pinpoint Test WB, Battery Input Warning Never Or Always Comes On
- Removal & Installation
- Wiring Diagrams