Section 40 (2.0L Engine Mechanical - Aba (A3 Platform))
WARNING: This page does not describe the selected car, but rather 26 other vehicles, including the 2002 Volkswagen Cabrio, 2001 Volkswagen Cabrio, 2000 Volkswagen Cabrio, 1999 Volkswagen Jetta, and 1999 Volkswagen Golf. However, it is still accessible from the selected car via links, so may be relevant.
- General, Technical Data
- Engine - Assembly
- Engine - Crankshaft, Cylinder Block
- Engine, disassembling and assembling
- Notes
- Part I
- Part II
- Part III
- Ribbed belt, removing and installing
- Drive belt, removing, installing and adjusting tension
- Thermo tension roller (models 1997 and up), removing and installing
- Sealing flange and flywheel/driveplate, removing and installing
- Removing and Installing Pressure Plate
- Crankshaft seal, pulley side, removing and installing
- Driveplate, removing and installing
- Crankshaft, removing and installing
- Crankshaft dimensions
- Piston and connecting rod, disassembling and assembling
- Checking piston ring gap
- Checking piston ring side clearance
- Checking Piston
- Piston Dimensions
- Checking Cylinder Bore
- Piston and cylinder dimensions, models up to 07.95
- Piston and cylinder dimensions 08.95-07.96
- Piston and cylinder dimensions 08.95 and up
- Engine, disassembling and assembling
- Engine - Cylinder Head, VALVETRAIN
- Cylinder head, servicing
- Valve Train, servicing
- Valve Train, disassembling and assembling (models up to 11.94)
- Checking Camshaft Axial Play
- Installation Position Of Camshaft Bearing Cap
- Reconditioned cylinder heads with camshaft bearing shells
- Valve dimensions
- Camshaft identification and timing
- Valve seats, refacing
- Camshaft seal, removing and installing
- Camshaft, removing and installing
- Hydraulic valve lifters, checking
- Valve guide wear, checking
- Valve guides, removing and installing
- Valve stem seals, replacing (cylinder head installed)
- Valve Train, disassembling and assembling (Models from 12.94 and up)
- Engine - Lubrication