Camshaft seal, removing and installing: Installing

WARNING: This page does not describe the selected car, but rather 26 other vehicles, including the 2002 Volkswagen Cabrio, 2001 Volkswagen Cabrio, 2000 Volkswagen Cabrio, 1999 Volkswagen Jetta, and 1999 Volkswagen Golf. However, it is still accessible from the selected car via links, so may be relevant.

Oil sealing lip.
Install seal with sleeve from 10 -203 and press in flush with outer surface of cylinder head.
Install drive belt and adjust tension, see DRIVE BELT, REMOVING, INSTALLING AND ADJUSTING TENSION .

NOTE: Removing and installing thermo tension roller for models 1997 and beyond, see THERMO TENSION ROLLER (1997 AND UP), REMOVING AND INSTALLING .