LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2001 >> Jetta GL, 2.0 B >> Repair and Diagnosis >> External Pages >> Different car >> Section 40 (2.0L Engine Mechanical - Aba (A3 Platform)) >> Engine - Crankshaft, Cylinder Block >> Engine, disassembling and assembling >> Thermo tension roller (models 1997 and up), removing and installing >> Tightening torque

Tightening torque

WARNING: This page does not describe the selected car, but rather 26 other vehicles, including the 2002 Volkswagen Cabrio, 2001 Volkswagen Cabrio, 2000 Volkswagen Cabrio, 1999 Volkswagen Jetta, and 1999 Volkswagen Golf. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE

Fastener Part no. Tightening torque
Torx® bolt N 903 659 02  25 Nm (18 ft lb) 
Collar screw 058 109 281  15-20 Nm (11-15 ft lb) 
Bolt/washer assy (2) N 902 809 01  7-11 Nm (62 -97 in. lb) 
Nut N 011 006 27  7-11 Nm (62 -97 in. lb) 
CAUTION: Part Numbers are for reference only. Always check with your Parts Dept. for the latest information.
scientia non olet · About LEMON Manuals