Section 1 (10 - Engine - Crankcase, Suspension 4.8L Turbo -- 970 - PANAMERA (970))

• WM, 100119 Removing And Installing Engine
  • Tools
  • Technical Values
  • Preliminary Work
  • Removing Engine
  • Installing Engine
  • Subsequent Work
• WM, 100127 Removing Engine From Transmission And Mounting Engine On Transmission
  • Removing Engine From Transmission And Mounting Engine On Transmission
• WM, 1001IN Supporting Engine On The Body (Engine Safety Device)
  • Tools
  • Tools And Materials
  • Preliminary Work
  • Supporting Engine On The Body (Engine Safety Device)
• WM, 1001IN Information On Working With Aluminium Screws And Magnesium Components - Important!
  • Tools
  • Technical Values
  • Information On Working With Aluminium Screws
  • Aluminium Screws
  • Information On Working With Magnesium Components
• WM, 1001IN Securing Engine On Assembly Support (Mounting Bracket)
  • Tools
  • Preliminary Work
  • Securing Engine On Assembly Support
• WM, 1001IN Lifting The Engine (Workshop Crane)
  • Tools
  • Securing Engine To Engine Crane
• WM, 1001IN Tightening Torques, Tightening Sequences And Assembly Overviews
  • Technical Values
    • Overview
    • General Overview
    • Aluminium Screws
    • Special Features And Component Deviations - V6
  • Information
    • Information On Aluminium Screws And Magnesium Components
  • 10, Crankcase
  • 13, Crankshaft Belt Drive
  • 15 Cylinder Head Valve Train
  • Overview Of Threaded Joints For Oil Guide Housing
  • 19, Cooling
  • 21, Turbocharging
  • 24, Fuel System
  • 26, Exhaust, Secondary Air
  • Generator And Starter
  • Knock Sensor
  • Vacuum Pump
  • Tandem Pump And Power-Steering Pump
  • Air-Conditioning Compressor
• WM, 1001IN Engine Number Marking
  • Information
    • Engine Number Marking - Panamera/Panamera S
    • Engine Number Marking - Panamera 4/Panamera4S/Panamera GTS/Panamera Turbo/Panamera Turbo S
    • Engine Number Marking - Panamera S Hybrid
    • Engine Number Marking - Panamera Diesel
• WM, 1001Z1 Disassembling Engine
  • Tools
  • Preliminary Work
  • Disassembling Engine
• WM, 1001Z2 Assembling Engine
  • Tools
  • Preliminary Work
  • Assembling Engine
• WM, 100431 Converting Reconditioned Engine (Replacing Engine)
  • Preliminary Work
  • Removing Engine From Engine Carrier (Removing Engine)
  • Converting Reconditioned Engine
  • Converting Engine
  • Subsequent Work
• WM, 101001 Assessment Of Cylinder Liners
  • Tools
  • Assessment Of Cylinder Liners
  • Signs Of Damage To Cylinder Liners (Stage 1)
  • Signs Of Damage To Cylinder Liners (Stage 2)
    • Normal Condition Of Liner/Support For Piston Lateral Forces
    • Striation/One Or More Individual Striations (No Deep Indentations)
    • Striation Band - Individual Striations Form A Complete Dark Band (No Deep Indentations)
  • Signs Of Damage To Cylinder Liners (Stage 3)
    • Liner Damage In The Entire Ring Groove Area
    • Oil Filter And Oil Pan Following Liner Damage
• WM, 101031 Converting Crankcase (Dowel Sleeves)
  • Converting Dowel Sleeves
• WM, 101055 Replacing Crankcase
  • Replacing Crankcase
• WM, 101320 Removing And Installing Oil Spray Jets
  • Technical Values
    • Overview
    • Upper Part Of Crankcase
  • Preliminary Work
  • Removing Oil Spray Jets
  • Installing Oil Spray Jets
  • Subsequent Work
• WM, 101802 Checking Pressure Loss Of Cylinders
  • Tools
  • Preliminary Work
  • Tools And Materials
    • Tool Kit For Testing Pressure Loss
  • Information
    • Test Evaluation
  • Testing Pressure Loss From The Engine
    • Checking Pressure Loss On The Engine
  • Subsequent Work
• WM, 103519 Removing And Installing Engine Mounting (Turbo)
  • Tools
  • Information
    • Component Overview
  • Preliminary Work
  • Removing Engine Mounting
    • Removing Right Engine Mount
  • Removing Left Engine Mount
  • Installing Engine Mounting
    • Installing Left Engine Mount
    • Installing Right Engine Mount
  • Subsequent Work
• WM, 103719 Removing And Installing Torque Support
  • Technical Values
    • Overview
    • Tightening Specifications For Torque Support
  • Preliminary Work
  • Removing Torque Support
  • Installing Torque Support
  • Subsequent Work
• WM, 1052IN Information On Engine Ventilation Systems On Turbo Engines (OBD2) - Especially For USA
  • Information
    • General Information
    • Overview Of Affected Line Connections - Panamera Turbo
    • Overview Of Affected Line Connections - Cayenne Turbo
• WM, 105519 Removing And Installing Oil Mist Separator
  • Information
  • Tightening Torques, Assembly Instructions
  • Preliminary Work
  • Removing Oil Mist Separator
  • Installing Oil Mist Separator
  • Subsequent Work
• WM, 108319 Removing And Installing Engine Cover (Design Cover)
  • Tools
  • Preliminary Work
  • Removing Engine Cover (Design Cover)
    • Removal
  • Installing Engine Cover (Design Cover)
    • Installation
  • Subsequent Work