Section 146 (55 - Lids, Flaps -- CARRERA (997))
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
- WM 551319 Removing And Installing Servo Motor For Front Lid Release (All Models)
- WM 551019 Removing And Installing Release For Front Lid (CARR. Coupe, CARR. S Coupe, CARR. CABRIO, CARR. S CABRIO, CARR. 4 Coupe, Turbo Coupe, CARR. 4S Coupe, TARGA 4, TARGA 4S, CARR. 4 CABRIO, CARR. 4S CABRIO, Turbo CABRIO, Gt3)
- WM 551719 Removing And Installing Front Lower Part Of Lid Lock (All Models)
- WM 551819 Removing And Installing Front Upper Part Of Lid Lock (All Models)
- WM 552215 Adjusting Front Lid (All Models)
- WM 552219 Removing And Installing Front Cover (All Models)
- WM 552237 Disassembling And Assembling Front Lid (All Models)
- WM 552519 Removing And Installing Front Lid Hinge (All Models)
- WM 553119 Removing And Installing Front Pneumatic Spring (All Models)
- WM 553319 Removing And Installing Front Lid Seal(All Models)
- WM 553719 Removing And Installing Filler Flap (All Models)
- WM 553819 Removing And Installing Switching Element For Filler Flap (All Models)
- WM 555719 Removing And Installing Release For Rear Lid (All Models)
- WM 556119 Removing And Installing Servo Motor For Emergency Release (All Models)
- WM 556219 Removing And Installing Front Emergency Release(All Models)
- WM 558219 Removing And Installing Rear Lid Release Switch(All Models)
- WM 558419 Removing And Installing Motor For Rear Lid Release (All Models)
- WM 558619 Removing And Installing Lower Part Of Lid Lock At Rear (All Models)
- WM 558719 Removing And Installing Rear Upper Part Of Lid Lock(All Models)
- WM 559015 Adjusting Rear Lid (All Models)
- WM 559019 Removing And Installing Rear Lid (All Models)
- WM 559037 Disassembling And Assembling Rear Lid (Turbo Coupe, Turbo S Coupe, Turbo CABRIO, Turbo S CABRIO)
- WM 559037 Disassembling And Assembling Rear Lid (I-No. XAF) (Turbo Coupe, Turbo CABRIO)
- WM 559119 Removing And Installing Rear Lid Hinge(All Models)
- WM 559319 Removing And Installing Rear Pneumatic Spring (All Models)