LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 146 (55 - Lids, Flaps -- CARRERA (997)) >> WM 551719 Removing And Installing Front Lower Part Of Lid Lock (All Models) >> Subsequent work >> Reworking

Subsequent work: Reworking

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.

Check gap dimensions on wing and front spoiler. Adjust lower part of lid lock and front lid if necessary. → 5 Diagram - body gap dimensions→ 552215 ADJUSTING FRONT LID  

Check inner luggage compartment release (Trunk Entrapment). → 556219 REMOVING AND INSTALLING EMERGENCY RELEASE  

Install front cover (lock mount).→ Removing and installing cover for lock mount 

scientia non olet · About LEMON Manuals