LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 146 (55 - Lids, Flaps -- CARRERA (997)) >> WM 558719 Removing And Installing Rear Upper Part Of Lid Lock(All Models) >> Removing rear upper part of lid lock

Removing rear upper part of lid lock

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Installation Position Of Upper Part Of Rear Lid Lock
G09824116Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Information 

  1. Open the rear lid.

    Information 

    New fastening screws must be used following removal.

  2. Unscrew -1-  fastening screws and remove upper part of lid lock -2-  .
    Fig 2: Removing Rear Upper Part Of Lid Lock
    G09824117Courtesy of PORSCHE CARS NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals