LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 146 (55 - Lids, Flaps -- CARRERA (997)) >> WM 551819 Removing And Installing Front Upper Part Of Lid Lock (All Models) >> Installing front upper part of lid lock >> Checking lid functions

Checking lid functions

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
  1. Close the front lid and lock it.
  2. Check that the front lid is held down by the safety hook (locking hook) after the lid lock has been opened.
  3. Check return spring on lower part of lock pulls back the safety hook as far as the stop when lid is open.
scientia non olet · About LEMON Manuals