LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 146 (55 - Lids, Flaps -- CARRERA (997)) >> WM 558719 Removing And Installing Rear Upper Part Of Lid Lock(All Models) >> Checking lid functions

Checking lid functions

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
  1. Close the rear lid and lock it.
  2. Check that the rear lid is held down by the safety hook (locking hook) of the lock upper part, after the lid lock has been opened.
  3. Check that the return spring on the lower part of the lock pulls back the safety hook as far as the stop when the lid is open.
scientia non olet · About LEMON Manuals