LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 146 (55 - Lids, Flaps -- CARRERA (997)) >> WM 559037 Disassembling And Assembling Rear Lid (I-No. XAF) (Turbo Coupe, Turbo CABRIO) >> Disassembling rear lid >> Removing adjusting element

Removing adjusting element

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
  1. Unscrew rubber buffer -1-  and unclip the collar -2-  .
    Fig 1: Identifying Rubber Buffer And Collar
    G09824143Courtesy of PORSCHE CARS NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals