LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 146 (55 - Lids, Flaps -- CARRERA (997)) >> WM 553119 Removing And Installing Front Pneumatic Spring (All Models) >> Installing front pneumatic spring >> Installing front pneumatic spring on the body

Installing front pneumatic spring on the body

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Overview Of Front Pneumatic Spring
G09824049Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  1. Position pneumatic spring.
    Fig 2: Installing Front Pneumatic Spring On Body
    G09824050Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  2. A second person should hold the front lid to prevent it from closing accidentally.
  3. Position pneumatic spring -1-  on the ball head and press on firmly. The pneumatic spring clicks audibly into place.
  4. Check that the safety clips -2-  have engaged correctly; repeat procedure, if necessary.
  5. Check pneumatic spring.
scientia non olet · About LEMON Manuals