LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 146 (55 - Lids, Flaps -- CARRERA (997)) >> WM 551819 Removing And Installing Front Upper Part Of Lid Lock (All Models) >> Removing front upper part of lid lock >> Removing upper part of front lid lock

Removing upper part of front lid lock

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Installation Position Of Front Lid Lock Upper Part
G09824018Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Information 

Information 

New fastening screws must be used following removal.

  1. Unscrew -1-  fastening screws and remove upper part of lid lock -2-  .
    Fig 2: Removing Upper Part Of Lid Lock
    G09824019Courtesy of PORSCHE CARS NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals